How to service the deployable steering column safely on Lincoln MKX?

The first step for servicing the deployable steering column requires testing the SRS dependency then opening all SRS devices outdoors at a minimum distance of 9.14 meters (30 feet) away while using hearing protection due to deployment noise. Access to the electrical connector can be gained by either lowering down or fully removing the deployable steering column from its instrument panel position. The wiring pigtail must be removed from the original vehicle harness when deploying the column except for at least 4 inches of wire remaining available for work. Laboratory personnel must first remove the wire sheathing before exposing the cut wire ends. Two 20-gauge wires with minimum 9.14 meters (30 feet) length each should be stripped at both ends to make a jumper harness. Joint the two wires at the beginning part of the jumper harness. The deployable steering column wiring should get its corresponding wires by attaching the jumper harness ends while applying insulation to close any contact points. Structure the jumper harness at least 9.14 meters (30 feet) away from the column. A completed deployment of the steering column requires connecting the ends of the jumper harness wires to a 12-volt battery following their detachment from each other. The personnel must wait for a minimum of 10 minutes after deployment before approaching the deployed steering column. They must follow standard scrapping procedures to dispose of it correctly.

OEM Lincoln MKX Steering Column

Steering Column Tilt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Steering Columns found

View related parts
Lincoln MKX Steering Column Part Number: DT4Z-3C529-A
$383.64 MSRP: $484.62
You Save: $100.98 (21%)
ADD TO CART
Product Specifications
- Other Name: Column Assembly - Steering; Column Assembly
- Replaced by: DT4Z-3C529-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2015 Lincoln MKX | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Steering Column Part Number: F2GZ-3C529-AE
$1050.64 MSRP: $1436.77
You Save: $386.13 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Column Assembly - Steering; Column Assembly
- Replaces: F2GZ-3C529-K, F2GZ-3C529-R, F2GZ-3C529-W
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lincoln MKX | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Steering Column Part Number: F2GZ-3C529-H
$468.76 MSRP: $635.38
You Save: $166.62 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Column Assembly - Steering; Column Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lincoln MKX | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Steering Column Part Number: BT4Z-3C529-A
$330.29 MSRP: $447.69
You Save: $117.40 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Column Assembly - Steering; Column Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011 Lincoln MKX | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Steering Column Part Number: F2GZ-3C529-AF
$1223.89 MSRP: $1673.69
You Save: $449.80 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Column Assembly - Steering; Column Assembly
- Replaces: F2GZ-3C529-X, F2GZ-3C529-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lincoln MKX | Black Label, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Steering Column Part Number: BT4Z-3C529-C
$196.34 MSRP: $271.62
You Save: $75.28 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Column Assembly - Steering; Column Assembly
- Manufacturer Note: Tilt Lever Serviced In Steering Column Assy
- Replaces: BT4Z-3C529-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011 Lincoln MKX | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Steering Column Part Number: DA1Z-3C529-C
Product Specifications
- Other Name: Column Assembly - Steering; Column Assembly
- Replaces: DA1Z-3C529-A, DA1Z-3C529-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2015 Lincoln MKX | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Steering Column Part Number: BA1Z-3C529-E
Product Specifications
- Other Name: Column Assembly - Steering; Column Assembly
- Replaces: BA1Z-3C529-A, BA1Z-3C529-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011 Lincoln MKX | Base | 6 Cyl 3.7 L GAS
View related parts
Lincoln MKX Steering Column Part Number: 9T4Z-3524-A
Product Specifications
- Other Name: Shaft; Column Assembly
- Replaces: 7T4Z-3524-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Lincoln MKX | Base | 6 Cyl 3.5 L GAS
View related parts
Lincoln MKX Steering Column Part Number: CA1Z-3C529-C
Product Specifications
- Other Name: Column Assembly - Steering; Column Assembly
- Replaces: BA1Z-3C529-B, BA1Z-3C529-C, CA1Z-3C529-A, CA1Z-3C529-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2013 Lincoln MKX | Base | 6 Cyl 3.7 L GAS

Lincoln MKX Steering Column

OEM Steering Column boasts unmatched quality. Each part goes through full quality checks. They adhere to Lincoln's official factory standards. These steps remove flaws and inconsistencies. So you can get Steering Column with long life and a perfect fit. Come to our website and find genuine Lincoln MKX parts. We keep a wide inventory of OEM MKX parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Lincoln MKX Steering Column refers to a part of the car that enables the connection of the steering wheel and steering gearbox or the steering wheel and the steering rack and pinion assembly and it plays a vital role in transmitting angles and torques that are necessary for an appropriate operation of the vehicle. Besides its intended purpose, the steering column is also involved in energy absorption in cases of impacts, location of certain elements, and facilities for the driver. Described to fold in instances of impacts, the steering column has features such as a tolerance ring as well as units that controls motion and absorb impact force. That is why Lincoln MKX Steering Column, conforming to the federal rules regarding the anti-theft devices and safety mechanisms, plays crucial role in vehicle functionality.

Lincoln MKX Steering Column Parts and Q&A

Steering Column
9T4Z-3524-A
Q: How to service the deployable steering column safely on Lincoln MKX?
A:
The first step for servicing the deployable steering column requires testing the SRS dependency then opening all SRS devices outdoors at a minimum distance of 9.14 meters (30 feet) away while using hearing protection due to deployment noise. Access to the electrical connector can be gained by either lowering down or fully removing the deployable steering column from its instrument panel position. The wiring pigtail must be removed from the original vehicle harness when deploying the column except for at least 4 inches of wire remaining available for work. Laboratory personnel must first remove the wire sheathing before exposing the cut wire ends. Two 20-gauge wires with minimum 9.14 meters (30 feet) length each should be stripped at both ends to make a jumper harness. Joint the two wires at the beginning part of the jumper harness. The deployable steering column wiring should get its corresponding wires by attaching the jumper harness ends while applying insulation to close any contact points. Structure the jumper harness at least 9.14 meters (30 feet) away from the column. A completed deployment of the steering column requires connecting the ends of the jumper harness wires to a 12-volt battery following their detachment from each other. The personnel must wait for a minimum of 10 minutes after deployment before approaching the deployed steering column. They must follow standard scrapping procedures to dispose of it correctly.