You must apply the parking brake and move the front seat forward before handling the front floor console work. After you position the front seats in the back, take out the two bolts from behind the front floor console. Take off the battery power and pull out the pin-type holder with the window control switch panel making sure to disconnect all electrical links. Set the vehicle into neutral gear by pushing the lever and place the shift indicator bezel somewhere safe. Take out the center console finish panel screws and detach the
Shift Cable from its connecting point. Loosen the electrical connector bolt and disconnect both front floor console electrical connectors to take out the front screws. Take out both front floor console sides on the driver and passenger wheel wells together with their electrical connections when equipped with them. Unbolt each front floor console bolt on the left and right sides to extract the console fully. You can set the floor console back by undoing the previous steps.