Other Name: Lamp Assembly - Rear, Stop And Flasher; Tail Light Assembly, Rear Right
Position: Rear Passenger Side
Replaces: LC5Z-13404-C, LC5Z-13404-D
Fits the following Lincoln Models:
Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Continental | 2017-2020 | 80th Anniversary Coach Door Edition, Base, Black Label, Coach Door Edition, Livery, Premiere, Reserve, Select | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.7 L GAS
Other Name: Lamp Assembly; Tail Light Assembly, Rear Left
Position: Rear Driver Side
Replaced by: LC5Z-13405-F
Replaces: LC5Z-13405-C, LC5Z-13405-D
Fits the following Lincoln Models:
Aviator | 2020-2023 | Base, Black Label, Black Label Grand Touring, Grand Touring, Livery, Reserve | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Q: How to service the rear tail light assembly on Lincoln LS?
A: To service the rear lamp assembly, remove the luggage compartment scuff plate and side trim panel. Then, take out the three nuts securing the assembly and detach the bulb sockets. When installing the new assembly, tighten the nuts to 5 Nm (44 lb-in) and reverse the removal steps.
Q: How to service the Tail Light on Lincoln Town Car?
A: To service the tail lamp, remove the 2 pin-type retainers and scuff plate, then set the trim panel aside. For THX(R) vehicles, remove the audio amplifier if servicing the LH rear lamp. Detach the bulb sockets, tighten the 3 nuts to 7 Nm (62 lb-in), and reverse the procedure to install.