Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2003-2005 Lincoln Town Car | Cartier, Cartier L, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L GAS
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2006-2011 Lincoln Town Car | Designer Series, Executive, Executive L, Protection Series, Signature, Signature L, Signature Limited | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
Manufacturer Note: A/C lines located in middle of condenser , R134A Retrofit
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
1991-1994 Lincoln Town Car | Base, Cartier, Cypress, Executive, Jack Nicklaus, Signature, Touring Edition, Tournament Edition | 8 Cyl 4.6 L GAS
Lincoln Town Car A/C Condenser
Welcome to our website where you can discover high-quality, genuine Lincoln Town Car A/C Condenser. We offer an extensive inventory of OEM Lincoln Town Car A/C Condenser at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Q: How to install a new A/C condenser and ensuring it is not leaking transmission fluid on Lincoln Town Car?
A: The core of the condenser is used as a cooler, and the bottom rows are an oil-to-air transmission cooler. When changing an A/C condenser when there is a refrigerant leak, make sure that the dye was not as a result of a transmission leak. There must be correct disassembly and reassembly, with new seals and PAG oil lubrication. Lastly, evacuate, leak test and charge the system.
Q: How to Service and Repair the A/C Condenser on Lincoln Town Car?
A: In order to fix the HVAC condenser, it is necessary to first perform a leak test in case the leak is suspected. Alternatively, the suction accumulator/drier should only be replaced when contamination has been observed. Take out refrigerant, battery and Radiator shield, de-connect lines and take away bolts to take out condenser. Installation, in reverse, with the correct PAG oil.