OEM Lincoln Zephyr Bumper Cover

Lincoln Zephyr Bumper Cover Parts and Q&A

• Bumper Cover
  6H6Z-17D957-BAPTM
  Q: How to service the rear bumper cover on Lincoln Zephyr?

  A:

  You should start the rear bumper cover servicing process by taking out the rear lamp assembly. The removal sequence starts with taking out three pin-type retainers on each side from the rear splash shield then proceeding with the removal of the two pin-type retainers from the lower rear bumper cover. You need to detach two bolts and two pin-type retainers which are positioned at the top of the rear bumper cover. Disconnect the electrical connector of the parking aid system when the vehicle has such functionality. The rear bumper cover becomes available for removal once completion of all these steps. The removal process should be used to install the new bumper cover.
• Bumper Cover
  8H6Z-17K835-DAPTM
  Q: How to service and repair the front bumper cover on Lincoln Zephyr?

  A:

  Starting front bumper cover repair or service of Ford Fusion, Mercury Milan and Lincoln Zephyr requires you to set the vehicle on a hoist with neutral engagement. Start by taking out the 6 pin-type retainers on three positions per side followed by the 8 fender splash shield screws that are positioned across four points on each side. Move toward the service and repair of the Ford Fusion and Mercury Milan and Lincoln Zephyr front bumper by extracting 4 Air Deflector bolts. Remove the 5 bolts which attach at the top section of the radiator grille for the Zephyr model. When replacing the radiator grille on Fusion and Milan vehicles remove two bolts along with two pin-type retainers that are positioned at the top. It is necessary to disconnect electric connectors from fog lamps if present on the vehicle. To install the front bumper cover you should follow the opposite steps of removal.