How to service the power mirror actuator on Lincoln Zephyr?

Either to remove the power mirror motor, or to service it, remove the rear view mirror glass and the center screw. Take a flat-blade screwdriver and unscrew the motor on the clips, and pull it out of the bracket. Unplug the electrical connector, and use the same procedure to install.

OEM Lincoln Zephyr Mirror Actuator

Mirror Motor Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Mirror Actuators found

View related parts
Lincoln Zephyr Motor Assembly, Front Part Number: 6U5Z-17D696-B
$77.30 MSRP: $118.97
You Save: $41.67 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Door Mirror Drive Motor, Front; Mirror Motor; Motor
- Manufacturer Note: RH/LH
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006 Lincoln Zephyr | Base | 6 Cyl 3.0 L GAS
View related parts
Lincoln Zephyr Motor Assembly, Front Part Number: 6U5Z-17D696-A
$45.61 MSRP: $65.25
You Save: $19.64 (31%)
Product Specifications
- Other Name: Door Mirror Drive Motor, Front; Mirror Motor; Motor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006 Lincoln Zephyr | Base | 6 Cyl 3.0 L GAS

Lincoln Zephyr Mirror Actuator

Welcome to our website where you can discover high-quality, genuine Lincoln Zephyr Mirror Actuator. We offer an extensive inventory of OEM Lincoln Zephyr Mirror Actuator at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Lincoln Zephyr Mirror Actuator Parts and Q&A

Motor Assembly, Front
6U5Z-17D696-B
Q: How to service the power mirror actuator on Lincoln Zephyr?
A: Either to remove the power mirror motor, or to service it, remove the rear view mirror glass and the center screw. Take a flat-blade screwdriver and unscrew the motor on the clips, and pull it out of the bracket. Unplug the electrical connector, and use the same procedure to install.