How to service and repair the blower motor on Mercury Grand Marquis?

In order to service the blower motor, disconnect the electrical connector and remove the wire harness retainer. Unscrew the motor, the vent tube and four screws, and then carefully remove the vent tube. Wipe off any corrosion on the shaft and then take out the wheel clip and the wheel. Installation Reverse to install.

OEM Mercury Grand Marquis Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
Mercury Grand Marquis Blower Motor Part Number: 4W7Z-19805-AA
$80.22 MSRP: $132.00
You Save: $51.78 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Cooling Blower; HVAC Blower Motor; Blower Assembly
- Manufacturer Note: 1980/1991: Also order F1AZ-18C629-A & 4W7Z-14A411-B jumpers. 1992/2004 (Before 4/19/04): Only the 4W7Z-14A411-B is needed. 2004 (From 4/19/04): No jumper is needed., FROM 4/19/2004
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2011 Mercury Grand Marquis | GS, GSL, Limited Edition, LS, LSE, Ultimate Edition | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

Mercury Grand Marquis Blower Motor

Welcome to our website where you can discover high-quality, genuine Mercury Grand Marquis Blower Motor. We offer an extensive inventory of OEM Mercury Grand Marquis Blower Motor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Mercury Grand Marquis Blower Motor Parts and Q&A

Blower Motor
4W7Z-19805-AA
Q: How to service and repair the blower motor on Mercury Grand Marquis?
A: In order to service the blower motor, disconnect the electrical connector and remove the wire harness retainer. Unscrew the motor, the vent tube and four screws, and then carefully remove the vent tube. Wipe off any corrosion on the shaft and then take out the wheel clip and the wheel. Installation Reverse to install.