Other Name: A/C Evaporator Core and Case Assembly; A/C Evaporator Core Repair Kit; Housing Assembly; A/C Evaporator
Manufacturer Note: For vehicles built before 12/06/04 also order 5W7Z-19A786-AA tube, 4W7Z-19A706-A resistor & 3U2Z-14S411-ZEA pigtail., w/ manual A/C, FROM 12/06/2004
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2005 Mercury Grand Marquis | GS, GSL, Limited Edition, LS, Ultimate Edition | 8 Cyl 4.6 L GAS
Other Name: A/C Evaporator Core and Case Assembly; A/C Evaporator Core Repair Kit; Housing Assembly; A/C Evaporator
Manufacturer Note: For vehicles built before 2/18/05 also order 5W7Z-19A786-AA., with ATC
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2003-2005 Mercury Grand Marquis | GS, GSL, Limited Edition, LS, LSE, Ultimate Edition | 8 Cyl 4.6 L GAS
Mercury Grand Marquis Evaporator
Welcome to our website where you can discover high-quality, genuine Mercury Grand Marquis Evaporator. We offer an extensive inventory of OEM Mercury Grand Marquis Evaporator at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Q: Is the evaporator core separately serviceable, and how to replace it on Mercury Grand Marquis?
A: The core of evaporator can not be serviced in isolation and should be substituted with housing assembly. In case of a leak, test it and then remove it. It is done by removing the old housing, removing the components and replacing them with a new one, and then putting in the new evaporator core component housing.
Q: Is the evaporator core separately serviceable, and what steps should be taken when repairing the refrigerant system on Mercury Grand Marquis?
A: Its housing assembly will have to replace the evaporator core. The suction accumulator just requires changing when it is contaminated or damaged. Whenever one suspects a leak then test before elimination. Take the housing off, take the parts and replace them into the new housing and place the new evaporator core housing back in place.