OEM Mercury Marauder Throttle Body

Mercury Marauder Throttle Body Parts Questions & Experts Answers

• Throttle Body
  3W3Z-9E926-BC
  Q: How to service the throttle body safely and effectively on Mercury Marauder?

  A: Service of the throttle body requires first and foremost that you establish an open area around fuel components to avoid ignition sources when dealing with high flammability mixtures. The service begins by disconnecting the ground cable of the battery and removing the air cleaner outlet tube. The first step entails disconnecting electrical connections of both throttle position (TP) sensor and idle air control (IAC) sensor. First remove the accelerator control splash shield following the disconnect of all three accelerator controls that consist of the Accelerator Cable and speed control cable with the return spring. The old throttle body gasket should be thrown away after removing the throttle body. Put a new gasket on the new throttle body while carrying out the installation with an inverse sequence of removal steps.