How to service the rear ABS Reluctor Ring on front wheel drive (FWD) and all-wheel drive (AWD) on Mercury Mariner?

On vehicles with a front-wheel drive (FWD), to access the rear ABS reluctor ring, hoist the vehicle in neutral, loosen the rear wheel hub nut (tighten to 290 Nm), then replace the reluctor ring. In the case of AWD, the rear ABS reluctor ring cannot be replaced independently of the rear axle halfshaft.

How to service the rear ABS Reluctor Ring on front wheel drive (FWD) on Mercury Mariner?

To maintain the rear ABS reluctor ring in FWD cars, lift the car in neutral, unscrew the rear wheel hub nut (looseness to 290 Nm) and install the new reluctor ring. In the case of AWD cars, the rear ABS reluctor ring is integrated with the rear axle halfshaft, and cannot be repaired or replaced independently.

OEM Mercury Mariner ABS Reluctor Ring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Reluctor Rings found

View related parts
Mercury Mariner ABS Ring Part Number: AL8Z-2C182-A
$13.97 MSRP: $20.33
You Save: $6.36 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ring - ABS Sensor; ABS Wheel Speed Sensor Tone Ring, Front, Rear; ABS Tone Ring; Front Sensor Ring; Rear Sensor Ring; Ring - ABS Sensing
- Replaces: 7L8Z-2C182-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Mercury Mariner | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner ABS Ring, Rear Part Number: 7L8Z-2C182-A
$44.98 MSRP: $64.35
You Save: $19.37 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ring - ABS Sensor; ABS Wheel Speed Sensor Tone Ring, Rear; ABS Tone Ring; Rear Sensor Ring; Indicator; Ring - ABS Sensing
- Manufacturer Note: Rear
- Position: Rear
- Replaces: YL8Z-2C182-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Mercury Mariner | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

Mercury Mariner ABS Reluctor Ring

Welcome to our website where you can discover high-quality, genuine Mercury Mariner ABS Reluctor Ring. We offer an extensive inventory of OEM Mercury Mariner ABS Reluctor Ring at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Mercury Mariner ABS Reluctor Ring Parts and Q&A

ABS Ring
AL8Z-2C182-A
Q: How to service the rear ABS Reluctor Ring on front wheel drive (FWD) and all-wheel drive (AWD) on Mercury Mariner?
A: On vehicles with a front-wheel drive (FWD), to access the rear ABS reluctor ring, hoist the vehicle in neutral, loosen the rear wheel hub nut (tighten to 290 Nm), then replace the reluctor ring. In the case of AWD, the rear ABS reluctor ring cannot be replaced independently of the rear axle halfshaft.
ABS Ring, Rear
7L8Z-2C182-A
Q: How to service the rear ABS Reluctor Ring on front wheel drive (FWD) on Mercury Mariner?
A: To maintain the rear ABS reluctor ring in FWD cars, lift the car in neutral, unscrew the rear wheel hub nut (looseness to 290 Nm) and install the new reluctor ring. In the case of AWD cars, the rear ABS reluctor ring is integrated with the rear axle halfshaft, and cannot be repaired or replaced independently.