How to Remove and Install Door Car Speakers on Mercury Mariner?

The process of door speaker installation begins by taking away the door trim panel. Release the pin-type retainer of the front door tweeter speaker then remove it before disconnecting its electrical connector. Remove the door speaker for the front location while removing the rear configuration by unfastening four screws from the door speaker and disconnecting the electrical connector. Repeating the removal steps will install the speakers.

How to Replace the Car Speakers, Amplifier, and Enclosure as a Complete Assembly on Mercury Mariner?

Starting the subwoofer speaker amplifier enclosure replacement requires the first step to be the right-hand quarter trim panel removal. Take the electrical connector off from the subwoofer amplifier before proceeding. You should disconnect the subwoofer speaker by taking out its three bolts. The bolt tightening torque should be set to 8 Nm (71 lb-in) during new assembly installation while you perform the installation in the reverse order from disassembly.

OEM Mercury Mariner Car Speakers

Audio Speakers

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Car Speakers found

View related parts
Mercury Mariner Door Speaker, Rear Part Number: 7U5Z-18808-B
$24.84 MSRP: $35.23
You Save: $10.39 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Speaker Assembly; Speaker, Center, Front, Front Lower, Rear; Rear Speaker; Quarter Panel Speaker; Front Driver Speaker; Package Tray Speaker; Rear Driver Speaker; Speaker
- Position: Rear
- Replaces: 6U5Z-18808-BA, 6U5Z-18808-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2011 Mercury Mariner | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Front Driver Speaker Part Number: 8L8Z-18808-BA
$44.75 MSRP: $64.02
You Save: $19.27 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Speaker Assembly; Speaker, Front; Rear Driver Speaker
- Position: Front
- Replaces: 6H6Z-18808-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2011 Mercury Mariner | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Speaker Part Number: 9L8Z-18C804-A
$297.37 MSRP: $436.67
You Save: $139.30 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Woofer
- Manufacturer Note: Includes Speaker And Amp
- Replaces: 7L8Z-18C804-B, 7L8Z-18C804-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Mercury Mariner | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Speaker, Driver Side Part Number: 6L8Z-18808-BA
$59.85 MSRP: $81.45
You Save: $21.60 (27%)
ADD TO CART
Product Specifications
- Other Name: Speaker Assembly; Speaker, Left; Tweeter
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Mariner | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Package Tray Speaker Part Number: 6U5Z-18808-AA
Product Specifications
- Other Name: Speaker Assembly; Speaker
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006 Mercury Mariner | Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Mariner Speaker, Passenger Side Part Number: 6L8Z-18808-AA
Product Specifications
- Other Name: Speaker Assembly; Speaker, Right; Tweeter
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Mariner | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Speaker Part Number: 5L8Z-18C804-BA
Product Specifications
- Other Name: Woofer
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Mariner | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

Mercury Mariner Car Speakers

OEM Car Speakers boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Car Speakers with long life and a perfect fit. Come to our website and find genuine Mercury Mariner parts. We keep a wide inventory of OEM Mariner parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Mercury Mariner Car Speakers Parts and Q&A

Speaker, Driver Side
6L8Z-18808-BA
Q: How to Remove and Install Door Car Speakers on Mercury Mariner?
A:
The process of door speaker installation begins by taking away the door trim panel. Release the pin-type retainer of the front door tweeter speaker then remove it before disconnecting its electrical connector. Remove the door speaker for the front location while removing the rear configuration by unfastening four screws from the door speaker and disconnecting the electrical connector. Repeating the removal steps will install the speakers.
Front Driver Speaker
8L8Z-18808-BA
Q: How to Replace the Car Speakers, Amplifier, and Enclosure as a Complete Assembly on Mercury Mariner?
A:
Starting the subwoofer speaker amplifier enclosure replacement requires the first step to be the right-hand quarter trim panel removal. Take the electrical connector off from the subwoofer amplifier before proceeding. You should disconnect the subwoofer speaker by taking out its three bolts. The bolt tightening torque should be set to 8 Nm (71 lb-in) during new assembly installation while you perform the installation in the reverse order from disassembly.