How to service the sunroof or moonroof panel on Mercury Mariner?

To service the sunroof or moonroof, turn the panel to the VENT position, and take away the four screws and the glass. Installation of the new glass should be done with tightening the screws up to 5 Nm (44 lb-in) and aligned accordingly and reversing the process of removing should be done afterwards.

OEM Mercury Mariner Sunroof

Moonroof

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Sunroofs found

View related parts
Mercury Mariner Sunroof Glass Part Number: 8L8Z-7850054-A
$258.14 MSRP: $379.07
You Save: $120.93 (32%)
Product Specifications
- Other Name: Glass
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Mercury Mariner | Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Sunroof Glass Part Number: 5L8Z-7850054-AA
$302.40 MSRP: $444.05
You Save: $141.65 (32%)
Product Specifications
- Other Name: Glass
- Replaces: YL8Z-7850054-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2008 Mercury Mariner | Base, Convenience, Hybrid, Luxury, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

Mercury Mariner Sunroof

Welcome to our website where you can discover high-quality, genuine Mercury Mariner Sunroof. We offer an extensive inventory of OEM Mercury Mariner Sunroof at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Mercury Mariner Sunroof Parts and Q&A

Sunroof Glass
5L8Z-7850054-AA
Q: How to service the sunroof or moonroof panel on Mercury Mariner?
A: To service the sunroof or moonroof, turn the panel to the VENT position, and take away the four screws and the glass. Installation of the new glass should be done with tightening the screws up to 5 Nm (44 lb-in) and aligned accordingly and reversing the process of removing should be done afterwards.