What Precautions Should Be Taken When Handling a TPMS Sensor with a Lithium-Ion Battery on Mercury Mariner?

The TPMS sensor contains a Lithium-ion battery that could leak hazardous chemicals during severe mechanical damage thus requiring immediate eye and skin water flush for 15 minutes followed by medical assistance. Seek immediate physician attention if a person swallows the battery. The correct hazardous material disposal methods need to be applied to TPMS sensors disposal because improper handling can cause serious physical injuries. A newly installed sensor must have the same color as the discarded sensor because sensors with different colors cannot be substituted for each other. Users can install and remove the sensor without needing to detach either the strap or cradle part. The first step involves tire removal from the wheel yet you must exercise caution while using small screwdrivers to eliminate any chance of harming the sensor locking clip. A pocket screwdriver together with a similar tool can separate the sensor locking clip before you safely detach the sensor from the cradle. Check that the sensor has complete cradle insertion because the correct seating produces a distinctive click noise. Place a new locking clip into the sensor until it reaches the correct orientation but verify that the sensor is in the correct position if full insertion is challenging. You need to put the tire onto the wheel and remember that a newly shipped tire pressure sensor must be activated through wheel installation along with tire mounting and recommended pressure inflation. Proceed with the sensor training sequence only after the passing of at least two minutes.

OEM Mercury Mariner TPMS Sensor

Tire Pressure Monitoring System Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 TPMS Sensors found

View related parts
Mercury Mariner Tire Pressure Sensor Part Number: 6F2Z-1A193-D
$20.60 MSRP: $32.71
You Save: $12.11 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Sensor Attachment; Tire Pressure Monitoring System (TPMS) Sensor Mounting Band; Service Kit; TPMS Sensor Strap; Pressure Sensor Strap; Strap; Sensor
- Manufacturer Note: 17" Wheels
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Mercury Mariner | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Tire Pressure Sensor Part Number: 6F2Z-1A193-C
$20.60 MSRP: $32.71
You Save: $12.11 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Sensor Attachment; Tire Pressure Monitoring System (TPMS) Sensor Mounting Band; Service Kit; Installation Kit; TPMS Sensor Strap; Strap; Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Mercury Mariner | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner TPMS Sensor Part Number: 9L3Z-1A189-A
$50.82 MSRP: $83.62
You Save: $32.80 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Kit - TPMS Sensor; Tire Pressure Monitoring System Service Kit; Tire Pressure Sensor; Pressure Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2011 Mercury Mariner | Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner TPMS Sensor Part Number: 6F2Z-1A189-A
$50.82 MSRP: $83.62
You Save: $32.80 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Tire Pressure Monitor; Tire Pressure Monitoring System (TPMS) Sensor; TPMS Sensor Service Kit; Tire Pressure Sensor; Tire Sensor; Pressure Sensor; Sensor Assembly - Tyre Pressure Monitor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Mercury Mariner | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Mariner Tire Pressure Sensor Part Number: 6F2Z-1A193-B
$20.60 MSRP: $32.71
You Save: $12.11 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Sensor Attachment; Tire Pressure Monitoring System (TPMS) Sensor Mounting Band; Service Kit; TPMS Sensor Strap; Strap
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Mercury Mariner | Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

Mercury Mariner TPMS Sensor

OEM TPMS Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get TPMS Sensor with long life and a perfect fit. Come to our website and find genuine Mercury Mariner parts. We keep a wide inventory of OEM Mariner parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Mercury Mariner TPMS Sensor is an important part of the Mercury Mariner vehicle to guarantee its safe and effective working. This TPMS Sensor is very popular when it comes to reliable performances to monitor tire pressure to prevent under inflation that may result in wastage of fuel, poor handling or probably a failed tire. The Mercury Mariner manufactured between year 2005 and 2010 had both, the indirect TPMS (iTPMS) and the direct TPMS (dTPMS) incorporated into it to meet the needs of its users. The iTPMS is software-based which calculates the tire pressure for the user, while on the other hand the dTPMS use battery operated sensors fixed on each tire and hence gives a real-time and accurate data. These two approaches bring about the premier cause of the automotive driving experience of the Mercury Mariner different from the rest of the autos in the market. Mercury Mariner TPMS Sensor models are well suited to fit the different Mariner models so that the driver can gauge the performance of the tires in use. However, the TPMS Sensor does more than make the driving experience more comfortable since it warns drivers of potential problems with their tires before they become fatal. Some of these features include, the ability to install the Mercury Mariser TPMS Sensor in either clamp in, screw in or snap in method. In conclusion, the Mercury Mariner TPMS Sensor depicts the true image of the brands value, which should be considered a priority for any owner of Mercury Mariner wishing to improve the safety standards and performance of the car.

Mercury Mariner TPMS Sensor Parts and Q&A

Tire Pressure Sensor
6F2Z-1A193-C
Q: What Precautions Should Be Taken When Handling a TPMS Sensor with a Lithium-Ion Battery on Mercury Mariner?
A:
The TPMS sensor contains a Lithium-ion battery that could leak hazardous chemicals during severe mechanical damage thus requiring immediate eye and skin water flush for 15 minutes followed by medical assistance. Seek immediate physician attention if a person swallows the battery. The correct hazardous material disposal methods need to be applied to TPMS sensors disposal because improper handling can cause serious physical injuries. A newly installed sensor must have the same color as the discarded sensor because sensors with different colors cannot be substituted for each other. Users can install and remove the sensor without needing to detach either the strap or cradle part. The first step involves tire removal from the wheel yet you must exercise caution while using small screwdrivers to eliminate any chance of harming the sensor locking clip. A pocket screwdriver together with a similar tool can separate the sensor locking clip before you safely detach the sensor from the cradle. Check that the sensor has complete cradle insertion because the correct seating produces a distinctive click noise. Place a new locking clip into the sensor until it reaches the correct orientation but verify that the sensor is in the correct position if full insertion is challenging. You need to put the tire onto the wheel and remember that a newly shipped tire pressure sensor must be activated through wheel installation along with tire mounting and recommended pressure inflation. Proceed with the sensor training sequence only after the passing of at least two minutes.