How to service and repair the front bumper cover on Mercury Milan?

Service and repair of Ford Fusion and Mercury Milan and MKZ front bumper covers requires first positioning the vehicle on a hoist with it set to neutral. The first step includes taking out six pin-type retainers which are present on each side and following with the removal of eight fender splash shield screws which are found four on each side. You need to remove the 4 air deflector bolts from the work. Rationale service requires the removal of 5 bolts which secure the radiator grille top on the MKZ model. The Fusion, Milan owners need to extract two bolts and two pin-type retainers which are situated atop the radiator grille. The fog lamp system requires removal of electrical wiring connections before these steps can commence. The installation of the front bumper cover requires performing the opposite steps of removal.

How to remove and replace the rear bumper cover on Mercury Milan?

The process of replacing a rear bumper cover starts with lamp assembly unmounting. Start by detaching the six pin-type retainers from the rear splash shield that are spread across both sides before moving on to the two lower pin-type retainers of the bumper cover. The rear bumper cover installation begins after removing each of the two pin-type retainers and two bolts situated at its upper portion. Starting from the side of the bumper, extract one screw located at the top section. A parking aid system requires the electrical connector to be disconnected along with the removal of the license plate lamp electrical connector from Milan and MKZ vehicles. Install the new cover by reversing the step of removing the rear bumper.

OEM Mercury Milan Bumper Cover

Bumper Shell

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Bumper Covers found

View related parts
Mercury Milan Bumper Cover, Rear Part Number: AN7Z-17K835-AAPTM
$228.55 MSRP: $313.58
You Save: $85.03 (28%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Milan Bumper Cover, Front Part Number: AN7Z-17D957-AAPTM
$193.91 MSRP: $299.25
You Save: $105.34 (36%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Milan Bumper Cover, Front Part Number: 6N7Z-17D957-CAPTM
$337.77 MSRP: $463.43
You Save: $125.66 (28%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Bumper Cover Part Number: 8N7Z-17K835-FAPTM
Product Specifications
- Other Name: Cover
- Replaces: 6N7Z-17K835-CAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2009 Mercury Milan | Base, High Version - Car, Hybrid, Low Version - Car, Mid Version - Car, Premier, Sport | 2.3L L4, 3.0L V6, 3.5L V6, 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

Mercury Milan Bumper Cover

OEM Bumper Cover boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Bumper Cover with long life and a perfect fit. Come to our website and find genuine Mercury Milan parts. We keep a wide inventory of OEM Milan parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Mercury Milan's Bumper Cover is a soft outer panel that hides the real bumper. The Bumper Cover also improves the looks of the vehicle and, in some cases, can help in smoothing the airflow to improve speed and fuel consumption. The Mercury Milan Bumper Cover conceals structural components while offering functional openings that direct air to the radiator as well as oil coolers, power steering coolers, or even the brakes for temperature control. The design includes indentations for various lights such as fog lights, parking lights, turning signal lights, or cornering lights. The indentations are completed with bezels or trim rings. In case of not fitting a certain light, a decorative cover would close the opening, thus giving it a uniform style. A tow eye hook concealed anchor point generally sits behind a panel with a removable cover when not in use to hide its location from view. The costs to repair damaged Bumper Cover to your vehicle range varies. This will be determined by unit inclusion, kit contents, and body type. The Bumper Cover is essential to the Mercury Milan because, over time, it can fade, crack, or even break due to bumps or UV exposure. Regular checks are important as they can affect styling and protection.

Mercury Milan Bumper Cover Parts and Q&A

Bumper Cover, Front
6N7Z-17D957-CAPTM
Q: How to service and repair the front bumper cover on Mercury Milan?
A:
Service and repair of Ford Fusion and Mercury Milan and MKZ front bumper covers requires first positioning the vehicle on a hoist with it set to neutral. The first step includes taking out six pin-type retainers which are present on each side and following with the removal of eight fender splash shield screws which are found four on each side. You need to remove the 4 air deflector bolts from the work. Rationale service requires the removal of 5 bolts which secure the radiator grille top on the MKZ model. The Fusion, Milan owners need to extract two bolts and two pin-type retainers which are situated atop the radiator grille. The fog lamp system requires removal of electrical wiring connections before these steps can commence. The installation of the front bumper cover requires performing the opposite steps of removal.
Bumper Cover
8N7Z-17K835-FAPTM
Q: How to remove and replace the rear bumper cover on Mercury Milan?
A:
The process of replacing a rear bumper cover starts with lamp assembly unmounting. Start by detaching the six pin-type retainers from the rear splash shield that are spread across both sides before moving on to the two lower pin-type retainers of the bumper cover. The rear bumper cover installation begins after removing each of the two pin-type retainers and two bolts situated at its upper portion. Starting from the side of the bumper, extract one screw located at the top section. A parking aid system requires the electrical connector to be disconnected along with the removal of the license plate lamp electrical connector from Milan and MKZ vehicles. Install the new cover by reversing the step of removing the rear bumper.