What should be inspected on the cylinder head joining flanges of the exhaust manifold to check for exhaust gas leaks and other potential damages on Mercury Milan?

Investigate the exhaust manifold cylinder head connecting flanges to identify any evidence of the leakage of exhaust gases. In addition, look into the exhaust manifold to see holes or broken gasket surfaces or any other damage that would not allow it to be used further.

How to service and repair the exhaust manifold on Mercury Milan?

Wipe the exhaust manifold with solvent and plastic scraper; change gaskets, studs, nuts and bolts. Calibration Use a straight-edge (e. g. Snap-On GA438A) calibrated on a flat surface, between 0.005 mm/ft, 24 in tool should be between 0.010 mm. Test warpage with feeler gauges; replace manifold in case it is greater than 0.76 mm.

OEM Mercury Milan Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Exhaust Manifolds found

View related parts
Mercury Milan Exhaust Manifold Part Number: 6E5Z-5G232-A
$2392.50 MSRP: $3031.43
You Save: $638.93 (22%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter with Integrated Exhaust Manifold; Manifold
- Replaces: 6E5Z-5G232-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS
View related parts
Mercury Milan Exhaust Manifold Part Number: 7E5Z-5G232-A
$4239.98 MSRP: $5377.43
You Save: $1137.45 (22%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter with Integrated Exhaust Manifold; Manifold
- Replaces: 7E5Z-5G232-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2009 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS
View related parts
Mercury Milan Exhaust Manifold, Green, Driver Side Part Number: AE5Z-5G232-B
$784.88 MSRP: $990.00
You Save: $205.12 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Exhaust Manifold And Catalyst; Catalytic Converter with Integrated Exhaust Manifold, Left; Manifold Converter; Manifold; Preconverter; Exhaust Manifold & Catalyst Assembly; Integrated Catalytic Converter
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Premier | 6 Cyl 3.0 L FLEX
View related parts
Mercury Milan Exhaust Manifold Part Number: AE5Z-5G232-A
$1962.98 MSRP: $2486.00
You Save: $523.02 (22%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter; Manifold W/Converter; Preconverter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Milan Exhaust Manifold, Front Driver Side Part Number: 7E5Z-5G232-AA
$1308.63 MSRP: $1810.36
You Save: $501.73 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Catalytic Converter with Integrated Exhaust Manifold, Left; Manifold W/Converter; Manifold; Preconverter; Catalytic Converter
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2008 Mercury Milan | Base, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Exhaust Manifold, Passenger Side Part Number: 6E5Z-5G232-AF
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter with Integrated Exhaust Manifold, Right; Manifold Converter; Manifold W/Converter; Manifold; Catalytic Converter with Integrated Exhaust Manifold; Catalytic Converter
- Manufacturer Note: Rear
- Position: Passenger Side
- Replaces: 6E5Z-5G232-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006 Mercury Milan | Base, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Exhaust Manifold Part Number: 9L8Z-9430-A
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Manifold
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Base, Premier | 4 Cyl 2.5 L GAS
View related parts
Mercury Milan Exhaust Manifold, Passenger Side Part Number: 8E5Z-5G232-E
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter with Integrated Exhaust Manifold, Right; Manifold W/Converter; Preconverter; Catalytic Converter
- Manufacturer Note: Rear
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Milan | Base, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Exhaust Manifold, Green, Passenger Side Part Number: 8E5Z-5G232-D
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter with Integrated Exhaust Manifold, Right; Manifold W/Converter; Preconverter; Catalytic Converter
- Manufacturer Note: Rear
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Milan | Base, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Exhaust Manifold, Front Driver Side Part Number: 8E5Z-5G232-C
Product Specifications
- Other Name: Exhaust Manifold And Catalyst; Catalytic Converter with Integrated Exhaust Manifold, Left; Manifold W/Converter; Manifold; Preconverter; Exhaust Manifold And Catalyst Assembly; Catalytic Converter
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Milan | Base, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Exhaust Manifold, Green, Front Driver Side Part Number: 8E5Z-5G232-B
Product Specifications
- Other Name: Exhaust Manifold And Catalyst; Catalytic Converter with Integrated Exhaust Manifold, Left; Manifold W/Converter; Manifold; Preconverter; Exhaust Manifold And Catalyst Assembly; Catalytic Converter
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Milan | Base, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Exhaust Manifold Part Number: 8E5Z-5G232-A
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter with Integrated Exhaust Manifold; Manifold Converter; Manifold
- Replaces: 7E5Z-5G232-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2009 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS
View related parts
Mercury Milan Exhaust Manifold, Passenger Side Part Number: 7E5Z-5G232-AB
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter; Manifold W/Converter; Preconverter
- Manufacturer Note: Rear
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2008 Mercury Milan | Base, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Exhaust Manifold Part Number: 6E5Z-5G232-CA
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter with Integrated Exhaust Manifold; Manifold Converter; Manifold
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS
View related parts
Mercury Milan Exhaust Manifold, Front Driver Side Part Number: 6E5Z-5G232-AA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Catalytic Converter with Integrated Exhaust Manifold, Left; Manifold Converter; Manifold W/Converter; Manifold; Catalytic Converter with Integrated Exhaust Manifold; Catalytic Converter
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006 Mercury Milan | Base, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Exhaust Manifold, Driver Side Part Number: 9E5Z-5G232-A
$854.63 MSRP: $1078.57
You Save: $223.94 (21%)
Product Specifications
- Other Name: Exhaust Manifold And Catalyst; Catalytic Converter with Integrated Exhaust Manifold, Left; Manifold; Preconverter; Exhaust Manifold And Catalyst Assembly; Catalytic Converter
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Premier | 6 Cyl 3.0 L FLEX
View related parts
Mercury Milan Exhaust Manifold, Passenger Side Part Number: 7E5Z-9430-BA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right; Catalytic Converter; Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Mercury Milan | Base, Premier | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

Mercury Milan Exhaust Manifold

Welcome to our website where you can discover high-quality, genuine Mercury Milan Exhaust Manifold. We offer an extensive inventory of OEM Mercury Milan Exhaust Manifold at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Mercury Milan Exhaust Manifold Parts and Q&A

Exhaust Manifold, Passenger Side
6E5Z-5G232-AF
Q: What should be inspected on the cylinder head joining flanges of the exhaust manifold to check for exhaust gas leaks and other potential damages on Mercury Milan?
A: Investigate the exhaust manifold cylinder head connecting flanges to identify any evidence of the leakage of exhaust gases. In addition, look into the exhaust manifold to see holes or broken gasket surfaces or any other damage that would not allow it to be used further.
Exhaust Manifold
7E5Z-5G232-A
Q: How to service and repair the exhaust manifold on Mercury Milan?
A: Wipe the exhaust manifold with solvent and plastic scraper; change gaskets, studs, nuts and bolts. Calibration Use a straight-edge (e. g. Snap-On GA438A) calibrated on a flat surface, between 0.005 mm/ft, 24 in tool should be between 0.010 mm. Test warpage with feeler gauges; replace manifold in case it is greater than 0.76 mm.