How Should You Safely Service the Fuel Filler Hose on Mercury Milan?

Silicon practice must be followed for fuel tank filler pipe servicing because lighted tobacco and personal electronic equipment requirements should be maintained away from fuel-related components which contain highly flammable mixtures. Alleviate the danger of electrical sparks by disconnecting the battery cable from its ground connection. To avoid accidental fuel spray while servicing components one must first discharge fuel system pressure. Start by placing the vehicle in neutral on the hoist and follow it up with releasing fuel system pressure before grounding the battery cable. Start by unplugging the fuel tank filler pipe cap followed by the three retaining screws surrounding the pipe. Begin by removing the vapor tube from the fuel door pocket and then the three nuts securing the heat shield before installation by tightening them to 9 Nm (80 lb-in). The bracket retaining nut requires removal before installation while you should tighten it to 9 Nm (80 lb-in). The two vapor tube retaining clips must be released followed by disconnection of the filler pipe hose from the fuel tank while tightening to 4 Nm (35 lb-in) during hook-up. To finish the installation task the vehicle must be without the fuel tank filler pipe assembly. Return to the removal procedure steps for assembly placement.

OEM Mercury Milan Fuel Filler Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Fuel Filler Hoses found

View related parts
Mercury Milan Pipe Assembly
Part Number: AE5Z-9034-AF
$182.06 MSRP: $265.00
You Save: $82.94 (32%)
ADD TO CART
Product Specifications
- Other Name: Pipe - Fuel Filler; Fuel Filler Neck; Fuel Tank Filler Neck; Filler Pipe
- Replaces: AE5Z-9034-R, AE5Z-9034-AC, AE5Z-9034-U, AE5Z-9034-Y
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Base, Premier | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Milan Filler Neck
Part Number: AE5Z-9034-AH
$141.06 MSRP: $205.33
You Save: $64.27 (32%)
ADD TO CART
Product Specifications
- Other Name: Pipe - Fuel Filler; Fuel Filler Neck; Fuel Tank Filler Neck; Fuel Filler Hose; Pipe Assembly; Filler Pipe
- Replaces: AE5Z-9034-AA, AE5Z-9034-X, AE5Z-9034-AE, AE5Z-9034-T
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Mercury Milan Filler Tube
Part Number: 8U5Z-17B068-B
$6.11 MSRP: $8.67
You Save: $2.56 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Funnel; Fuel Filler Neck Adapter; Fuel Filler Neck Sleeve; Filler Neck Sleeve; Fuel Filler Hose; Fuel Tank Filler; Filler Pipe Tube; Tube; Filler
- Manufacturer Note: Attached To Underneath 42624 In Luggage Compartment
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Milan Pipe Assembly
Part Number: AE5Z-9034-AG
$142.32 MSRP: $207.17
You Save: $64.85 (32%)
ADD TO CART
Product Specifications
- Other Name: Pipe - Fuel Filler; Fuel Filler Neck; Fuel Tank Filler Neck; Filler Pipe
- Replaces: AE5Z-9034-Z, AE5Z-9034-AD, AE5Z-9034-V, AE5Z-9034-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Mercury Milan | Base, Premier | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
View related parts
Mercury Milan Filler Hose
Part Number: 7E5Z-9047-A
$36.23 MSRP: $51.83
You Save: $15.60 (31%)
Product Specifications
- Other Name: Hose - Filler Pipe; Fuel Filler Hose; Lower Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Mercury Milan | Base, Hybrid, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Filler Hose
Part Number: 7E5Z-9047-B
Product Specifications
- Other Name: Hose - Filler Pipe; Fuel Filler Hose; Filler Neck Hose; Lower Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Milan Lower Hose
Part Number: 6E5Z-9047-AA
Product Specifications
- Other Name: Hose - Filler Pipe; Fuel Filler Hose
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

Mercury Milan Fuel Filler Hose

Welcome to our website where you can discover high-quality, genuine Mercury Milan Fuel Filler Hose. We offer an extensive inventory of OEM Mercury Milan Fuel Filler Hose at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Mercury Milan Fuel Filler Hose Parts Questions & Experts Answers

Lower Hose
6E5Z-9047-AA
Q: How Should You Safely Service the Fuel Filler Hose on Mercury Milan?
A: Silicon practice must be followed for fuel tank filler pipe servicing because lighted tobacco and personal electronic equipment requirements should be maintained away from fuel-related components which contain highly flammable mixtures. Alleviate the danger of electrical sparks by disconnecting the Battery Cable from its ground connection. To avoid accidental fuel spray while servicing components one must first discharge fuel system pressure. Start by placing the vehicle in neutral on the hoist and follow it up with releasing fuel system pressure before grounding the battery cable. Start by unplugging the fuel tank filler pipe cap followed by the three retaining screws surrounding the pipe. Begin by removing the vapor tube from the fuel door pocket and then the three nuts securing the heat shield before installation by tightening them to 9 Nm (80 lb-in). The bracket retaining nut requires removal before installation while you should tighten it to 9 Nm (80 lb-in). The two vapor tube retaining clips must be released followed by disconnection of the filler pipe hose from the fuel tank while tightening to 4 Nm (35 lb-in) during hook-up. To finish the installation task the vehicle must be without the fuel tank filler pipe assembly. Return to the removal procedure steps for assembly placement.