My Garage
Cart

OEM Mercury Milan Spoiler

Spoiler Wing
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Spoilers found

  • Mercury Milan Spoiler - 9N7Z-5444210-AB
    Mercury Milan Spoiler Diagram - 9N7Z-5444210-AB
    View related parts

    Mercury Milan Spoiler Assembly, Rear
    Part Number: 9N7Z-5444210-AB

    $1543.11 MSRP: $2134.74
    You Save: $591.63 (28%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Kit - Rear Spoiler
    • Manufacturer Note: Prime Paint To Match When Color Has Not Been Released For Service
    • Position: Rear
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2010-2011 Mercury Milan | Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX
  • Mercury Milan Spoiler - 6E5Z-5444210-AA
    Mercury Milan Spoiler Diagram - 6E5Z-5444210-AA
    View related parts
    Product Specifications
    • Other Name: Kit - Rear Spoiler; Spoiler
    • Position: Rear
    • Replaces: 7E5Z-5444210-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2006-2009 Mercury Milan | Base, Premier | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
  • Mercury Milan Spoiler - 8E5Z-5444210-AA
    Mercury Milan Spoiler Diagram - 8E5Z-5444210-AA
    View related parts
    Product Specifications
    • Other Name: Kit - Rear Spoiler
    • Manufacturer Note: Prime Paint To Match When Color Has Not Been Released For Service
    • Position: Rear
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2010-2011 Mercury Milan | Base, Hybrid, Premier | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX

Mercury Milan Spoiler

Welcome to our website where you can discover high-quality, genuine Mercury Milan Spoiler. We offer an extensive inventory of OEM Mercury Milan Spoiler at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Mercury Milan Spoiler Parts Questions & Experts Answers

  • Q: How to service and repair the spoiler on Mercury Milan?
    A: Services and repairs of the spoiler must start by opening the luggage compartment lid before removing both the pushpin retainers and insulator. Remove the spoiler nuts from the luggage compartment lid after disconnecting its electrical connector and tighten them to 6 Nm (53 lb-in) when reinstalling. Separate the tape which runs along the front edge of the ST spoiler when performing its removal on the luggage compartment lid. A replacement spoiler will be needed in case pin-type retainers on the bottom surface break off during removal. When installing the spoiler you must first clean the luggage compartment lid before pressing the front edge of the spoiler once its fasteners are secured to achieve proper tape bonding. A proper tool should be inserted between the luggage compartment lid and spoiler to find the pin-type retainers at each end until successful release through pushing in the retainers and pulling up on the spoiler. The spoiler installation process requires returning to the steps used for removal.

Related Mercury Milan Parts