How to service and repair the engine mount, specifically the anti-roll component on Mercury Montego?

The maintenance of the engine mount anti-roll component starts with removing the air cleaner outlet pipe. The service begins by removing the four throttle body bolts before setting the throttle body to the side while tightening it to a torque of 10 Nm (89 lb-in). Put new threadlock on the threads of the roll restrictor cross brace-to-roll restrictor bolt before tightening it to 48 Nm (35 lb-ft) when reinstalling it. Follow the sequence by removing the four roll restrictor cross brace-to-strut tower bolts first and then the crossbar. Clean the bolts before treating them with new threadlock and tightening them to 55 Nm (41 lb-ft) when finishing the installation. The process requires removal of four roll restrictor support bracket bolts before taking out the support bracket itself. Clean all bolts thoroughly and treat them with new threadlock before tightening them to 55 Nm (41 lb-ft) when reinstalling. Lift the wiring retainer from the roll restrictor before you remove its two securing bolts. Perform reinstallation of bolts by cleaning them and applying new threadlock and tightening each to 55 Nm (41 lb-ft). The installation process ends by performing the reverse of all removal steps.

OEM Mercury Montego Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Engine Mounts found

View related parts
Mercury Montego Restrictor, Rear Part Number: 5F9Z-6068-CA
$58.62 MSRP: $81.10
You Save: $22.48 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Torque Strut, Rear; Engine Mount Torque Strut
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Bracket Part Number: 5F9Z-6F055-CB
$101.10 MSRP: $147.17
You Save: $46.07 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Automatic Transmission Mount Bracket; Engine Mount Bracket; Motor Mount; Transmission Mount
- Replaces: 5F9Z-6F055-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Damper Part Number: 5F9Z-6F050-BA
$13.78 MSRP: $18.75
You Save: $4.97 (27%)
ADD TO CART
Product Specifications
- Other Name: Strut; Engine Torque Strut; Motor Mount
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Transmission Mount, Driver Side Part Number: 5F9Z-6068-A
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount, Left; Engine Mount Bracket; Transfer Case Mount.; Front Mount; Rear Mount
- Position: Driver Side
- Replaces: 5F9Z-6068-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Front Mount, Passenger Side Part Number: 5F9Z-6038-BA
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Motor Mount
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Restrictor, Front Part Number: 5F9Z-6F069-BA
Product Specifications
- Other Name: Engine Torque Strut, Front; Engine Mount Torque Strut
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Bracket Part Number: 5F9Z-6F055-BB
$111.41 MSRP: $162.17
You Save: $50.76 (32%)
Product Specifications
- Other Name: Automatic Transmission Mount Bracket; Engine Mount Bracket; Motor Mount; Transmission Mount
- Replaces: 5F9Z-6F055-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Restrictor, Front Part Number: 5F9Z-6F069-CA
Product Specifications
- Other Name: Engine Torque Strut, Front; Engine Mount Torque Strut
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Cross Bar Part Number: 5F9Z-6F054-AA
Product Specifications
- Other Name: Bracket; Engine Support Rod; Engine Mount Bracket; Transmission Mount; Motor Mount; Strut Support
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Damper Part Number: 5F9Z-6F050-AA
Product Specifications
- Other Name: Strut; Engine Torque Strut; Motor Mount
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Restrictor, Rear Part Number: 5F9Z-6068-BB
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Torque Strut, Rear; Engine Mount Torque Strut
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS

Mercury Montego Engine Mount

OEM Engine Mount boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Engine Mount with long life and a perfect fit. Come to our website and find genuine Mercury Montego parts. We keep a wide inventory of OEM Montego parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Mercury Montego Engine Mount is another product which is highly acclaimed for its durability and efficiency so crucial to the performance of several of the mercury Montego models. This Engine Mount is specially engineered specifically for noise and vibration insulation due to the engine operation and situates and effectively stabilizes the engine and transaxle within the chassis for a exceedingly comfortable ride. However, its importance is not just for comfort; to optimize the performance of the car and to strictly adhere to right placement that will not put stress to some of the vital parts of the engine. The Mercury Montego Engine Mount consists of highly developed types such as hydraulic and electric "active" ones that change according to engine revs so as to minimize vibration and maximize utilisation. As to the compatibility, the tool works with several generations of Montego, which started from the classics of 1968 and ended with the models produced up to 2007; The advantages of Mercury Montego Engine Mount are that they improve the engine and the transmission performance as well as the safety of the vehicle through strong material used in its manufacturing and its capacity to isolate vibrations. Mercury has always taken its place in presenting high-quality products in the automotive market, and this Engine Mount is not an exception to this rule for securing each drive in the Montego to the maximum comfort. As is it provides the right combination of modern technology and well-established quality, the Mercury Montego Engine Mount is a crucial part of the car for any Mercury Montego owner who wants to preserve the operational capability of their vehicle.

Mercury Montego Engine Mount Parts and Q&A

Bracket
5F9Z-6F055-CB
Q: How to service and repair the engine mount, specifically the anti-roll component on Mercury Montego?
A:
The maintenance of the engine mount anti-roll component starts with removing the air cleaner outlet pipe. The service begins by removing the four Throttle Body bolts before setting the throttle body to the side while tightening it to a torque of 10 Nm (89 lb-in). Put new threadlock on the threads of the roll restrictor cross brace-to-roll restrictor bolt before tightening it to 48 Nm (35 lb-ft) when reinstalling it. Follow the sequence by removing the four roll restrictor cross brace-to-strut tower bolts first and then the crossbar. Clean the bolts before treating them with new threadlock and tightening them to 55 Nm (41 lb-ft) when finishing the installation. The process requires removal of four roll restrictor support bracket bolts before taking out the support bracket itself. Clean all bolts thoroughly and treat them with new threadlock before tightening them to 55 Nm (41 lb-ft) when reinstalling. Lift the wiring retainer from the roll restrictor before you remove its two securing bolts. Perform reinstallation of bolts by cleaning them and applying new threadlock and tightening each to 55 Nm (41 lb-ft). The installation process ends by performing the reverse of all removal steps.