How to service and repair the intermediate parking brake cable on Mercury Montego?

A necessary first step when servicing or repairing the intermediate parking brake cable is to reduce parking brake cable tension. First disconnect the parking brake cable tension. Then detach the three bracket bolts from the subframe by using a 12 Nm (9 ft. lbs.) torque after reinstalling them. Detach the intermediate cable from its connection point with the front cable at the cable-to-cable union before freeing the cable from both the body bracket and rear right cable at the second cable-to-cable union. You should release the LH rear cable from its position on the intermediate cable conduit equalizer. Keep RH subframe bolts loose without removal while using a suitable screw jack stand to support the LH side of the subframe and take out both LH subframe bolts. The screw jack stand should be used to vertically lower the LH subframe side 120 mm (4.72 inches) before removing the wireform bracket bolt for extraction of the intermediate parking brake cable that needs a torque setting of 18 Nm (13 ft. lbs.) during installation. You should complete the procedure in reverse before checking the parking brake system to verify its proper function.

OEM Mercury Montego Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Parking Brake Cables found

View related parts
Mercury Montego Front Cable Part Number: FB5Z-2853-A
$47.40 MSRP: $75.27
You Save: $27.87 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Replaces: 8G1Z-2853-A, 9G1Z-2853-A, 9G1Z-2853-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Rear Cable, Passenger Side Part Number: 9F9Z-2A635-B
$57.71 MSRP: $91.64
You Save: $33.93 (38%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Passenger Side
- Replaces: 6F9Z-2A635-F, 6F9Z-2A635-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Rear Cable, Driver Side Part Number: 9F9Z-2A635-A
$57.71 MSRP: $91.64
You Save: $33.93 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Driver Side
- Replaces: 6F9Z-2A635-H, 6F9Z-2A635-J
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Rear Cable, Driver Side Part Number: 6F9Z-2A635-K
$53.59 MSRP: $74.13
You Save: $20.54 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Driver Side
- Replaces: 6F9Z-2A635-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Rear Cable, Passenger Side Part Number: 6F9Z-2A635-E
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Passenger Side
- Replaces: 6F9Z-2A635-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Rear Cable, Driver Side Part Number: 5F9Z-2A635-DA
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Rear Cable, Driver Side Part Number: 5F9Z-2A635-CA
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Rear Cable, Passenger Side Part Number: 5F9Z-2A635-AA
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS

Mercury Montego Parking Brake Cable

OEM Parking Brake Cable boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Parking Brake Cable with long life and a perfect fit. Come to our website and find genuine Mercury Montego parts. We keep a wide inventory of OEM Montego parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Parking Brake Cable is one of the essential parts that reflect the dependability as well as efficiency of the Mercury Montego's parking brake. This cable links the parking brake to the broader braking mechanism to guarantee that the Mercury Montego does not move, especially when parked on a slope thus improving on safety and reliability. Available in two forms: for the first- and second-generation Mercury Montego series and Montego MX, and for the third-generation Montego andling, the Parking Brake Cable has a corrosion-resistant design to resist wear and tear and to provide smooth, reliable engagement of the parking brake. The Parking Brake Cable is essential to the mechanical operations of any car because it stops the car from moving without notice. The Mercury Montego model has a long background as for its appearance - it was introduced in the 1967 model year, and the quality of its Parking Brake Cable corresponds to the brand's high level. Most notably, the Parking Brake Cable has been designed in such a way that it does not easily stretched or broken like in other vehicles, in a way that the parking brake may entirely fail to work. It is recommended to perform regular service of the Parking Brake Cable since problems such as the parking brake light being on may appear. This cable is unique in the automotive world because this construction and reliability allow the Mercury Montego to remain safe on the road. Due to the versatility this part offers in terms of functionality as well as safety aspect, the Parking Brake Cable is an invaluable asset for the cars functionality and durability.

Mercury Montego Parking Brake Cable Parts and Q&A

Front Cable
FB5Z-2853-A
Q: How to service and repair the intermediate parking brake cable on Mercury Montego?
A:
A necessary first step when servicing or repairing the intermediate parking brake cable is to reduce parking brake cable tension. First disconnect the parking brake cable tension. Then detach the three bracket bolts from the subframe by using a 12 Nm (9 ft. lbs.) torque after reinstalling them. Detach the intermediate cable from its connection point with the front cable at the cable-to-cable union before freeing the cable from both the body bracket and rear right cable at the second cable-to-cable union. You should release the LH rear cable from its position on the intermediate cable conduit equalizer. Keep RH subframe bolts loose without removal while using a suitable screw jack stand to support the LH side of the subframe and take out both LH subframe bolts. The screw jack stand should be used to vertically lower the LH subframe side 120 mm (4.72 inches) before removing the wireform bracket bolt for extraction of the intermediate parking brake cable that needs a torque setting of 18 Nm (13 ft. lbs.) during installation. You should complete the procedure in reverse before checking the parking brake system to verify its proper function.