How to Service and Repair a Seat Cover for the Rear Seat Backrest for 60 Percent on Mercury Montego?

The service process of the rear seat backrest cover requires initial rear seat cushion removal and subsequent 60 percent rear seat backrest removal for both Five Hundred and Montego vehicles. The button-release of the head restraint adjust button separates the head restraint assembly followed by screw removal and outboard cover and armrest bracket. Perform bolt removal of the armrest-to-bracket assembly but restore its torque value to 23 Nm (17 lb-ft) when reinstalling. The pin on the inboard side of the armrest can be slid out from the backrest for armrest detachment followed by folding up the armrest pocket panel of the trim cover and placing it aside. After that, remove the pin-type retainers and detach the J-clips located at the base of the trim cover behind the backrest followed by disconnecting the hook and loop strips at the back. It is essential to be careful during the process of dividing the seat backrest trim cover from the hook and loop strip to prevent damage to both components and the seat backrest foam. Detach the hook and loop strips and place the trim cover upside-down and then remove the three rows of hog rings while stringing the latch release strap through the trim cover. First users should lift the backrest foam pad before pinching together the head restraint guide with their hands and taking off the two restraint guides. Backrest trim cover removal can commence afterward. The process ends by performing steps exactly opposite to those carried out during dismantlement.

OEM Mercury Montego Seat Cover

Car Seat Protector Cover

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

67 Seat Covers found

View related parts
Mercury Montego Cushion Cover, Passenger Side
Part Number: 5T5Z-5462900-BAB
Product Specifications
- Other Name: Cover Assembly - Seat Cushion
- Manufacturer Note: (HT)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Seat Back Cover, Driver Side
Part Number: 5T5Z-5464417-CAA
Product Specifications
- Other Name: Cover Assembly - Seat Back
- Manufacturer Note: (M7)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Seat Back Cover, Passenger Side
Part Number: 6T5Z-5464416-BD
Product Specifications
- Other Name: Cover Assembly - Seat Back
- Manufacturer Note: (H7)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2007 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Cushion Cover, Passenger Side
Part Number: 5T5Z-5462900-AAA
Product Specifications
- Other Name: Cover Assembly - Seat Cushion
- Manufacturer Note: (M7)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Cushion Cover, Passenger Side
Part Number: 5T5Z-5462900-AAB
Product Specifications
- Other Name: Cover Assembly - Seat Cushion
- Manufacturer Note: (MT)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Cushion Cover, Passenger Side
Part Number: 5T5Z-5462900-BAA
Product Specifications
- Other Name: Cover Assembly - Seat Cushion
- Manufacturer Note: (H7)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Cushion Cover, Charcoal, Passenger Side
Part Number: 5T5Z-5462900-BAC
Product Specifications
- Other Name: Cover Assembly - Seat Cushion
- Manufacturer Note: (HW)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Cushion Cover, Driver Side
Part Number: 5T5Z-5462901-AAA
Product Specifications
- Other Name: Cover Assembly - Seat Cushion
- Manufacturer Note: (M7)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Cushion Cover, Driver Side
Part Number: 5T5Z-5462901-AAB
Product Specifications
- Other Name: Cover Assembly - Seat Cushion
- Manufacturer Note: (MT)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Cushion Cover, Driver Side
Part Number: 5T5Z-5462901-BAA
Product Specifications
- Other Name: Cover Assembly - Seat Cushion
- Manufacturer Note: (H7)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Cushion Cover, Driver Side
Part Number: 5T5Z-5462901-BAB
Product Specifications
- Other Name: Cover Assembly - Seat Cushion
- Manufacturer Note: (HT)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Cushion Cover, Charcoal, Driver Side
Part Number: 5T5Z-5462901-BAC
Product Specifications
- Other Name: Cover Assembly - Seat Cushion
- Manufacturer Note: (HW)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Cushion Cover, Rear
Part Number: 5T5Z-5463804-BAA
Product Specifications
- Other Name: Cover Assembly - Rear Seat; Cover Assembly - Rear Seat Cushion
- Manufacturer Note: (H7)
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Cushion Cover, Rear
Part Number: 5T5Z-5463804-BAB
Product Specifications
- Other Name: Cover Assembly - Rear Seat; Cover Assembly - Rear Seat Cushion
- Manufacturer Note: (HT)
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Cushion Cover, Charcoal, Rear
Part Number: 5T5Z-5463804-BAC
Product Specifications
- Other Name: Cover Assembly - Rear Seat; Cover Assembly - Rear Seat Cushion
- Manufacturer Note: (HW)
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Seat Back Cover, Passenger Side
Part Number: 5T5Z-5464416-AAB
Product Specifications
- Other Name: Cover Assembly - Seat Back
- Manufacturer Note: (HT)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Seat Back Cover, Passenger Side
Part Number: 5T5Z-5464416-BAA
Product Specifications
- Other Name: Cover Assembly - Seat Back
- Manufacturer Note: (M7)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Seat Back Cover, Passenger Side
Part Number: 5T5Z-5464416-BAB
Product Specifications
- Other Name: Cover Assembly - Seat Back
- Manufacturer Note: (MT)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Seat Back Cover, Passenger Side
Part Number: 5T5Z-5464416-CAA
Product Specifications
- Other Name: Cover Assembly - Seat Back
- Manufacturer Note: (M7)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS
View related parts
Mercury Montego Seat Back Cover, Passenger Side
Part Number: 5T5Z-5464416-CAB
Product Specifications
- Other Name: Cover Assembly - Seat Back
- Manufacturer Note: (MT)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Mercury Montego | Luxury, Premier | 6 Cyl 3.0 L GAS

| Page 1 of 4 |Next >

1-20 of 67 Results

Mercury Montego Seat Cover

Welcome to our website where you can discover high-quality, genuine Mercury Montego Seat Cover. We offer an extensive inventory of OEM Mercury Montego Seat Cover at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Mercury Montego Seat Cover Parts Questions & Experts Answers

Seat Back Cover, Rear Driver Side
5T5Z-5466601-BAB
Q: How to Service and Repair a Seat Cover for the Rear Seat Backrest for 60 Percent on Mercury Montego?
A: The service process of the rear seat backrest cover requires initial rear Seat Cushion removal and subsequent 60 percent rear seat backrest removal for both Five Hundred and Montego vehicles. The button-release of the head restraint adjust button separates the head restraint assembly followed by screw removal and outboard cover and armrest bracket. Perform bolt removal of the armrest-to-bracket assembly but restore its torque value to 23 Nm (17 lb-ft) when reinstalling. The pin on the inboard side of the armrest can be slid out from the backrest for armrest detachment followed by folding up the armrest pocket panel of the trim cover and placing it aside. After that, remove the pin-type retainers and detach the J-clips located at the base of the trim cover behind the backrest followed by disconnecting the hook and loop strips at the back. It is essential to be careful during the process of dividing the seat backrest trim cover from the hook and loop strip to prevent damage to both components and the seat backrest foam. Detach the hook and loop strips and place the trim cover upside-down and then remove the three rows of hog rings while stringing the latch release strap through the trim cover. First users should lift the backrest foam pad before pinching together the head restraint guide with their hands and taking off the two restraint guides. Backrest trim cover removal can commence afterward. The process ends by performing steps exactly opposite to those carried out during dismantlement.