My Garage
Cart

OEM Mercury Monterey Blower Motor Resistor

Heater Blower Motor Resistor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motor Resistors found

  • Mercury Monterey Blower Motor Resistor Diagram - 4L3Z-19E624-AA
    View related parts

    Mercury Monterey Control Valve Part Number: 4L3Z-19E624-AA

    $182.87 MSRP: $303.64
    You Save: $120.77 (40%)
    ADD TO CART
    Product Specifications
    • Other Name: Control; HVAC Blower Motor Regulator; HVAC Control Module; Control Module; Control Assembly; Controller
    • Replaces: 3W4Z-19E624-AA, 3W4Z-19E624-AB
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2004-2007 Mercury Monterey | Base, Convenience, Luxury, Premier | 6 Cyl 4.2 L GAS
  • Mercury Monterey Blower Motor Resistor - 3F2Z-18591-BA
    Mercury Monterey Blower Motor Resistor Diagram - 3F2Z-18591-BA
    View related parts

    Mercury Monterey Resistor, Rear Part Number: 3F2Z-18591-BA

    $37.60 MSRP: $51.16
    You Save: $13.56 (27%)
    ADD TO CART
    Product Specifications
    • Other Name: Resistor Assembly; HVAC Blower Motor Resistor, Rear; Blower Motor Resistor
    • Position: Rear
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 2004-2007 Mercury Monterey | Base, Convenience, Luxury, Premier | 6 Cyl 4.2 L GAS

Mercury Monterey Blower Motor Resistor

Welcome to our website where you can discover high-quality, genuine Mercury Monterey Blower Motor Resistor. We offer an extensive inventory of OEM Mercury Monterey Blower Motor Resistor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Mercury Monterey Blower Motor Resistor Parts and Q&A

  • Q: How to service the blower motor resistor on Mercury Monterey?
    A: In order to repair the blower motor resistor, begin by dropping the glove compartment. Unscrew the two screws that are holding the electrical connector on the resistor, and remove the resistor. In order to install the new resistor, it is simply necessary to reverse the steps of removing it.
  • Q: How to service the blower motor resistor for the auxiliary climate control on Mercury Monterey?
    A: In order to remove the Blower Motor resistor to install the auxiliary climate control, you must remove the LH quarter trim panel and then install the resistor. After that, remove electrical connector of the auxiliary blower motor resistor. Unscrew the screws of resistor and remove it. If you want to install the new resistor, then just reverse these steps.

Related Mercury Monterey Parts