How to service and repair the front parking brake cable on Mercury Monterey?

The front parking brake cable service and repair process should begin by placing the vehicle in neutral position on the hoist. The two parking brake rear cables need removal from the equalizer. Raise the parking brake control handle before you detach the parking brake control trim cover. You need to pass the cable guide through the floor pan after which you can detach the cable assembly from the parking brake control. The installation process ends by following the opposite steps to reinstall it.

How to service the rear parking brake cable on Mercury Monterey?

The service of rear parking brake cables starts with placing the vehicle in neutral and hoisting it to the correct height. Detach the parking brake rear cable from the equalizer followed by removing its end from the brake caliper lever arm. The service starts by detaching the cable and conduit from the brake caliper bracket followed by removing the bolt from the spring pocket wireform bracket. This bolt needs to be tightened to 17 Nm (13 ft. lbs.) at reassembly. Before installation secure the trailing arm wireform bracket bolt at 25 Nm (18 ft. lbs.). When installing the cable end you will notice spring tabs which lock the cable to the body then remove both the conduit and rear cable from the body and next remove the parking brake cable from the vehicle. In the final step of installation you should follow the reverse order of removal.

OEM Mercury Monterey Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Parking Brake Cables found

View related parts
Mercury Monterey Cable Assembly, Driver Side Part Number: 6F2Z-2A635-AB
$44.21 MSRP: $61.16
You Save: $16.95 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Driver Side
- Replaces: 3F2Z-2A635-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Mercury Monterey | Base, Convenience, Luxury, Premier | 6 Cyl 4.2 L GAS
View related parts
Mercury Monterey Cable Assembly, Passenger Side Part Number: 6F2Z-2A635-AA
$43.81 MSRP: $60.61
You Save: $16.80 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Passenger Side
- Replaces: 3F2Z-2A635-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Mercury Monterey | Base, Convenience, Luxury, Premier | 6 Cyl 4.2 L GAS

Mercury Monterey Parking Brake Cable

OEM Parking Brake Cable boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Parking Brake Cable with long life and a perfect fit. Come to our website and find genuine Mercury Monterey parts. We keep a wide inventory of OEM Monterey parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Mercury Monterey Parking Brake Cable is one of the essential parts that are used in the parking brake system in the Mercury Monterey vehicle to help in holding the car with firmly especial on a slope when parked. This important cable links the parking mechanism to the braking system so as to stop reversing or rotation of the car and contribute to overall control and efficiency. Being one of the most renowned Mercury products, the Monterey Parking Brake Cable addresses the requirements of most Monterey model within the 1952-2007 period. This Parking Brake Cable is designed with an emphasis on longevity, using materials that will not stretch, a characteristic that results in improper contact of the parking brake. New Mercury Monterey Parking Brake Cable need to be properly maintained and signals that it requires replacement are when one struggles to engage the parking brake and the parking brake light comes on. The importance of this aspect cannot be overemphasized given that it is one of the key determinant of safety of the car and its occupants. Outstanding qualities of the Mercury Monterey Parking Brake Cable comprise of its guaranteed fitment and compatibility across multiple Monterey generations putting it in a league of its owns in the automobile market. Such Copper Parking Brake Cable upgrade offers a chance to improve the functioning of the car and the confidence in the car's safety while parked.

Mercury Monterey Parking Brake Cable Parts and Q&A

Cable Assembly, Passenger Side
6F2Z-2A635-AA
Q: How to service and repair the front parking brake cable on Mercury Monterey?
A:
The front parking brake cable service and repair process should begin by placing the vehicle in neutral position on the hoist. The two parking brake rear cables need removal from the equalizer. Raise the parking brake control handle before you detach the parking brake control trim cover. You need to pass the cable guide through the floor pan after which you can detach the cable assembly from the parking brake control. The installation process ends by following the opposite steps to reinstall it.
Cable Assembly, Driver Side
6F2Z-2A635-AB
Q: How to service the rear parking brake cable on Mercury Monterey?
A:
The service of rear parking brake cables starts with placing the vehicle in neutral and hoisting it to the correct height. Detach the parking brake rear cable from the equalizer followed by removing its end from the brake caliper lever arm. The service starts by detaching the cable and conduit from the brake caliper bracket followed by removing the bolt from the spring pocket wireform bracket. This bolt needs to be tightened to 17 Nm (13 ft. lbs.) at reassembly. Before installation secure the trailing arm wireform bracket bolt at 25 Nm (18 ft. lbs.). When installing the cable end you will notice spring tabs which lock the cable to the body then remove both the conduit and rear cable from the body and next remove the parking brake cable from the vehicle. In the final step of installation you should follow the reverse order of removal.