My Garage
Cart

OEM Mercury Mountaineer Wiper Switch

Windshield Wiper Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Switches found

  • Mercury Mountaineer Wiper Switch - YL5Z-13K359-BAA
    Mercury Mountaineer Wiper Switch Diagram - YL5Z-13K359-BAA
    View related parts
    Product Specifications
    • Other Name: Switch Assembly - Direction Indicator; Combo Switch; Hazard Flasher; Multi-Function; Multi Purpose; Turn Signal & Hazard Switch
    • Replaces: F87Z-13K359-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 1997-1998 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
  • Mercury Mountaineer Wiper Switch - F87Z-17A553-AB
    Mercury Mountaineer Wiper Switch Diagram - F87Z-17A553-AB
    View related parts
    Product Specifications
    • Other Name: Switch Assembly; Windshield Washer Switch; Rear Wiper Switch
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 1998-2001 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
  • Mercury Mountaineer Wiper Switch - F5TZ-17A553-A
    Mercury Mountaineer Wiper Switch Diagram - F5TZ-17A553-A
    View related parts
    Product Specifications
    • Other Name: Switch Assembly; Windshield Washer Switch; Rear Wiper Switch
    • Manufacturer Note: Bulb not serviced separately, intermittent - rear window wiper
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    Fits the following Vehicles:
    • 1997-2001 Mercury Mountaineer | Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS

Mercury Mountaineer Wiper Switch

Welcome to our website where you can discover high-quality, genuine Mercury Mountaineer Wiper Switch. We offer an extensive inventory of OEM Mercury Mountaineer Wiper Switch at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Mercury Mountaineer Wiper Switch Parts Questions & Experts Answers

  • Q: How to Service and Repair the Wiper Switch on Mercury Mountaineer?
    A: The first step to work on and maintain the wiper switch requires Battery Cable disconnection. You need to use a punch tool to push the release tab while pulling out the ignition cylinder lock after pushing the ignition key to the RUN position to disconnect the device. First untwist the handle and shank of the tilt wheel in a counterclockwise direction if it is applicable. The first step involves gently pulling away both upper and lower steering column shrouds after unscrewing them. Unscrewing starts the multi-function switch removal process before disconnecting electrical connectors and completely taking the switch out. Reinstall procedures require caution because the battery disconnection and reconnection creates abnormal drive conditions during which the vehicle needs to drive 16 km (10 mi) or more until its adaptive strategy adjusts properly. You should execute the installation steps in the reverse sequence of the removal process.

Related Mercury Mountaineer Parts