How to Service and Repair Automatic Transmission Shift Levers for the Column Shift on Mercury Sable?

The first step to work on the column shift automatic transmission shift levers involves taking off the key release lever and ignition switch lock cylinder. First, secure the lower instrument panel covering with its screws, then uninstall the upper and lower steering column shrouds (3530). The service and repair of the column shift automatic transmission shift levers require removal of the transaxle range selector lever pin and transaxle range selector lever, the steering column opening weather seal (3513), and the transaxle range selector lever clip. To mount the transaxle range selector lever, begin with attaching the transaxle range selector lever clip; afterward, place the steering column opening weather seal on the transaxle range selector lever. The selector lever requires installation alongside its pin by tapping the pin until the head meets the transmission column shift selector tube (7212) while making the Tinnerman nut visible through the bottom of the tube. Install the steering column opening weather seal first, then put back the upper and lower steering column shrouds into their positions. To conclude the reinstallation, secure the lower instrument panel cover with screws, then place back the ignition switch lock cylinder followed by attaching the key release lever.

OEM Mercury Sable Automatic Transmission Shift Levers

Automatic Transmission Shifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Automatic Transmission Shift Levers found

View related parts
Mercury Sable Shift Lever Part Number: 5F1Z-7210-D
$7.13 MSRP: $9.87
You Save: $2.74 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing Assembly - Gear Shift
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2002 Mercury Sable | GS, LS, LS Premium | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Shift Lever Part Number: F8DZ-7210-BD
Product Specifications
- Other Name: Lever - Gear Shift; Manual Transmission Shift Lever; Automatic Transmission Selector Handle; Gear Shift Assembly
- Manufacturer Note: Black - Trim code *J - without OD cancel switch, column shift
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Mercury Sable | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Shifter Assembly Part Number: 9A4Z-7210-DA
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Selector Handle; Shift Lever; Gear Shift Assembly
- Replaces: 8A4Z-7210-E, 8A4Z-7210-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Shift Housing Part Number: 8G1Z-7210-E
Product Specifications
- Other Name: Housing Assembly - Gear Shift; Automatic Transmission Shift Lever; Shifter; Shift Lever
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Shifter Assembly Part Number: 8A4Z-7210-F
Product Specifications
- Other Name: Lever - Gear Shift; Automatic Transmission Selector Handle; Shift Lever; Gear Shift Assembly
- Replaces: 8A4Z-7210-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Shift Lever Part Number: 3F1Z-7210-AA
Product Specifications
- Other Name: Lever - Gear Shift
- Manufacturer Note: Complete shifter assembly with shifter mechanism, bezel, and Woodgrained knob , Floor shift , with interior accent trim package "C"
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Mercury Sable | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

Mercury Sable Automatic Transmission Shift Levers

OEM Automatic Transmission Shift Levers boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Automatic Transmission Shift Levers with long life and a perfect fit. Come to our website and find genuine Mercury Sable parts. We keep a wide inventory of OEM Sable parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Mercury Sable Automatic Transmission Shift Levers Parts and Q&A

Shift Lever
5F1Z-7210-D
Q: How to Service and Repair Automatic Transmission Shift Levers for the Column Shift on Mercury Sable?
A:
The first step to work on the column shift automatic transmission shift levers involves taking off the key release lever and ignition switch lock cylinder. First, secure the lower instrument panel covering with its screws, then uninstall the upper and lower steering column shrouds (3530). The service and repair of the column shift automatic transmission shift levers require removal of the transaxle range selector lever pin and transaxle range selector lever, the steering column opening weather seal (3513), and the transaxle range selector lever clip. To mount the transaxle range selector lever, begin with attaching the transaxle range selector lever clip; afterward, place the steering column opening weather seal on the transaxle range selector lever. The selector lever requires installation alongside its pin by tapping the pin until the head meets the transmission column shift selector tube (7212) while making the Tinnerman nut visible through the bottom of the tube. Install the steering column opening weather seal first, then put back the upper and lower steering column shrouds into their positions. To conclude the reinstallation, secure the lower instrument panel cover with screws, then place back the ignition switch lock cylinder followed by attaching the key release lever.