How to Service and Repair the Brake Rotor on Mercury Sable?

The brake caliper anchor plate needs removal before discarding brake disc retainers while beginning the brake rotor/disc service and repair operations. Universal Silicone Brake Caliper Grease and Dielectric Compound WA10 (D7AZ-19A331-A) with equivalent ESR-M99C56-A rating must be applied to the disc-hub contact area in case the brake disc cannot come off easily. Strike the disc with a plastic hammer in between the wheel bolts. An alternative method for disc removal includes using a 2-3 jaw puller model 205-D027 (D80L-1013-A) or equivalent to perform the task. The disc requires examination for runout only after using excessive force for removal. The disc removal process requires cleaners to prepare surfaces before disc application of High Temperature Nickel Anti-Seize Lubricant F6AZ-9L494-AA or an equivalent product under ESE-M12A4-A specification on the disc pilot diameter. Reinstall the brake disc using the reverse removal procedure.

How to Remove and Replace the Brake Rotor on Mercury Sable?

Vehicle wheel removal with tire uninstallation is the first step toward rotor/disc replacement. Positioning the brake caliper without hanging it from the brake hose will preserve its integrity. The brake caliper anchor plate needs to have its installation bolts removed before setting it aside. When attaching the new anchor plate secure the bolts to 110 Nm (81 lb-ft). The removal of the current brake disc screw requires immediate discarding with the new screw installation followed by a torque measurement set to 21 Nm (15 lb-ft). The installation process for the brake disc follows the reverse of removal steps through the use of new brake caliper anchor plate bolts. To test that brakes function properly apply them multiple times during this process.

OEM Mercury Sable Brake Rotor

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Brake Rotors found

View related parts
Mercury Sable Rotor, Front Part Number: YF1Z-1V125-F
$75.80 MSRP: $116.65
You Save: $40.85 (36%)
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaced by: YF1Z-1V125-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2005 Mercury Sable | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Rotor Part Number: 5U2Z-1V125-GD
$75.80 MSRP: $116.65
You Save: $40.85 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly
- Replaces: 5U2Z-1V125-GC, BRR-224, 5F9Z-2C026-BA, 5U2Z-1V125-S, 8G1Z-2C026-A, 8G1Z-2C026-B, BRR-137, BRRF-48
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Deluxe, Limited, Premier, SE, SEL | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Rotor, Front Part Number: 8G1Z-1125-B
$117.13 MSRP: $176.67
You Save: $59.54 (34%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Disc Brake Rotor; Brake Rotor
- Manufacturer Note: Warranty Eligible
- Position: Front
- Replaces: 5F9Z-1125-C, 8G1Z-1125-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Deluxe, Limited, Premier, SE, SEL | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Rotor, Rear Part Number: YF1Z-1V125-AA
$5.11 MSRP: $7.07
You Save: $1.96 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Brake Rotor
- Position: Rear
- Replaces: FODZ-2C026-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1989-1992 Mercury Sable | GS, LS | 3.0L V6, 3.8L V6, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Rotor, Rear Part Number: YF1Z-1V125-DB
$30.64 MSRP: $42.39
You Save: $11.75 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Rear; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaces: BRRF-57, BRR-51, YF1Z-2C026-AA, YF1Z-2C026-BA, YF1Z-1V125-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-2005 Mercury Sable | G, GS, LS, LS Premium, LTS, Platinum Edition | 3.0L V6, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Rotor Part Number: YF1Z-1V125-C
$40.85 MSRP: $56.51
You Save: $15.66 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Brake Rotor
- Replaces: BRR-46, F4OY-1125-A, F3OY-1125-A, F4DZ-1125-A, F4SZ-1125-A, F1SZ-1125-A, F4DZ-1125-B, F58Z-1125-BB, F6DZ-1125-B, YF1Z-1V125-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1996 Mercury Sable | G, GS, LS, LTS | 3.0L V6, 3.8L V6, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Drum, Front Part Number: YF1Z-1V125-GA
Product Specifications
- Other Name: Rotor Assembly; Brake Rotor; Rotor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1991 Mercury Sable | GS, LS | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Rotor, Front Part Number: YF1Z-1V125-CA
Product Specifications
- Other Name: Rotor Assembly; Brake Rotor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1993 Mercury Sable | GS, LS | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Rotor, Front Part Number: YF1Z-1125-AA
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Brake Rotor
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2000 Mercury Sable | G, GS, LS, LS Premium | 6 Cyl 3.0 L GAS

Mercury Sable Brake Rotor

OEM Brake Rotor boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Brake Rotor with long life and a perfect fit. Come to our website and find genuine Mercury Sable parts. We keep a wide inventory of OEM Sable parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Mercury Sable Brake Rotor Parts and Q&A

Rotor, Front
YF1Z-1V125-F
Q: How to Service and Repair the Brake Rotor on Mercury Sable?
A:
The brake caliper anchor plate needs removal before discarding brake disc retainers while beginning the brake rotor/disc service and repair operations. Universal Silicone Brake Caliper Grease and Dielectric Compound WA10 (D7AZ-19A331-A) with equivalent ESR-M99C56-A rating must be applied to the disc-hub contact area in case the brake disc cannot come off easily. Strike the disc with a plastic hammer in between the wheel bolts. An alternative method for disc removal includes using a 2-3 jaw puller model 205-D027 (D80L-1013-A) or equivalent to perform the task. The disc requires examination for runout only after using excessive force for removal. The disc removal process requires cleaners to prepare surfaces before disc application of High Temperature Nickel Anti-Seize Lubricant F6AZ-9L494-AA or an equivalent product under ESE-M12A4-A specification on the disc pilot diameter. Reinstall the brake disc using the reverse removal procedure.
Rotor
5U2Z-1V125-GD
Q: How to Remove and Replace the Brake Rotor on Mercury Sable?
A:
Vehicle wheel removal with tire uninstallation is the first step toward rotor/disc replacement. Positioning the Brake Caliper without hanging it from the brake hose will preserve its integrity. The brake caliper anchor plate needs to have its installation bolts removed before setting it aside. When attaching the new anchor plate secure the bolts to 110 Nm (81 lb-ft). The removal of the current brake disc screw requires immediate discarding with the new screw installation followed by a torque measurement set to 21 Nm (15 lb-ft). The installation process for the brake disc follows the reverse of removal steps through the use of new brake caliper anchor plate bolts. To test that brakes function properly apply them multiple times during this process.