How to Service and Repair the Brake Backing Plate on Mercury Villager?

To maintain the backing plate, take out the wheel cylinder, dust cap, cotter pin, hub nut and washer. Remover the bearing assembly and hub, then the parking brake lever. Run the cable through the backing plate and take the ABS sensor out and unbolt the backing plate. Installation can be reversed.

OEM Mercury Villager Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Backing Plates found

View related parts
Mercury Villager Backing Plate, Passenger Side Part Number: F3XY2211A
Product Specifications
- Other Name: Plate Assembly; Brake Dust Shield
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-2002 Mercury Villager | Base, Estate, GS, LS, Nautica, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Mercury Villager Backing Plate Part Number: F5XY2K004A
Product Specifications
- Other Name: Shield; Brake Dust Shield; Splash Shield
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1998 Mercury Villager | GS, LS, Nautica | 6 Cyl 3.0 L GAS

Mercury Villager Brake Backing Plate

Welcome to our website where you can discover high-quality, genuine Mercury Villager Brake Backing Plate. We offer an extensive inventory of OEM Mercury Villager Brake Backing Plate at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Mercury Villager Brake Backing Plate Parts and Q&A

Backing Plate, Passenger Side
F3XY2211A
Q: How to Service and Repair the Brake Backing Plate on Mercury Villager?
A: To maintain the backing plate, take out the Wheel Cylinder, dust cap, cotter pin, hub nut and washer. Remover the bearing assembly and hub, then the parking brake lever. Run the cable through the backing plate and take the ABS Sensor out and unbolt the backing plate. Installation can be reversed.