OEM Mercury Villager Power Steering Pump

Mercury Villager Power Steering Pump Parts Questions & Experts Answers

• Power Steering Pump
  XF5Z-3A674-BA
  Q: How to Maintain and Repair a Power Steering Pump and What Steps Are Involved for a Mercury Villager?

  A: Service of the power steering pump starts with eliminating the power steering pulley. First remove the high pressure hose power steering bolt and after that disconnect the hose from its fittings. You should remove the power steering return hose after unclipping its holding clamp. Unplug the power steering electrical connector then remove the rear power steering pump bolt. Take off the power steering pump front bolts before extracting the power steering pump from its position. You must replace the fittings' teflon seal of the power steering pressure hose during installation before attaching the hoses. Also check that the threads remain free from debris. The installation will end when you perform the reverse steps of removal.