Ford 5F1Z-15604-C
Receiver

The first step to repair or service the Body Control Module requires disconnection of the battery to protect it from static electrical charges because electronic modules respond negatively to these types of exposures. Disconnect the bulkhead connectors both from the smart junction box and from connectors at its bottom section. You should first remove the retaining nuts and then free the retaining clip to extract the SJB. The installation procedure requires performing actions in the reverse order of removal steps.

Disconnection of the battery should be your first step when servicing the Body Control Module because electronic modules remain sensitive to static electrical charges. The beginning of SJB service requires you to separate bulkhead connectors from the smart junction box while also unfixing connectors that sit at the bottom of the SJB. The service procedure for the SJB starts with removing retaining nuts before unclipping and extracting the SJB assembly. Follow the opposite steps used in removal to install the system successfully.