Other Name: Kit - Alarm/Keyless Lock System; Control Module; Control Assembly; Controller
Replaces: JU5Z-15604-Q
Fits the following Ford Models:
Edge | 2019-2024 | SE, SEL, ST, ST-Line, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 2.7 L GAS
Fusion | 2019-2020 | Energi Titanium, S, SE, SE Hybrid, SEL, SEL Hybrid, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
Police Responder Hybrid | 2019-2020 | Base | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV)
SSV Plug-In Hybrid | 2019-2020 | Base | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Escape | 2021-2022 | S, SE, SE Hybrid, SE Plug-In Hybrid, SEL, SEL Hybrid, SEL Plug-In Hybrid, Titanium, Titanium Hybrid, Titanium Plug-In Hybrid | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
C-Max | 2013-2018 | Energi SE, Energi SEL, Energi Titanium, Hybrid SE, Hybrid SEL, Hybrid Titanium | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Focus | 2012-2018 | Electric | BATTERY EV (EV/BEV)
Q: How to service the Body Control Module on Ford E-150?
A: Service on the Vehicle Security Module starts with removing power from the battery to protect its inner components from electric charges. Career on by taking out the right-hand A-pillar lower trim panel which provides access to the module. The vehicle security module should first have its electric connectors removed before unthreading the securing nuts. During the process of installing a new module the remote keyless entry transmitters require programming. The installation process requires performing the steps in reverse order to the removal process.
Q: How to service and repair the Body Control Module, specifically the Security Module on Ford Explorer Sport Trac?
A: Before installing any new Vehicle Security Module into the Body Control Module the technician must upload its configuration data onto correct diagnostic tools because these settings need to be downloaded into the new module. First, disconnect the battery. You should then remove the air bag that sits on the passenger side. Position the vehicle security module forward after removing its screws and detach it completely. Detach the electrical cable connections situated on the Vehicle Security Module. The installation process for the new module requires executing the reverse steps from removal.
Q: How to service and repair the Body Control Module on Ford Ranger?
A: A Body Control Module service or repair process starts with updating diagnostic tool configuration and then takes out the Smart Junction Box (SJB). First disconnect the battery for safety purposes followed by right-hand lower cowl trim panel removal. Disconnection of four electrical connectors must occur before removing the three screws that secure the SJB. You must perform a download of stored module configuration data from the diagnostic tool into the brand-new module after its installation. The installation finishes when you execute the opposite process of removal.