My Garage
Cart
Make sure this part fits

Ford 6W4Z-3085-AA
Upper Control Arm, Front Driver Side

2000-2006 Ford 6W4Z3085AA

Customer Questions & Expert Answers (14)
Ford 6W4Z-3085-AA Upper Control Arm, Front Driver Side
Ford 6W4Z-3085-AA Upper Control Arm, Front Driver Side
  • Part Description
    Arm Assembly - Front Suspension; Front Left Upper Control Arm and Ball Joint Assembly.
  • Base No.
    3084
  • Position
    Front Upper Driver Side
  • Replaces
    4W4Z-3085-AA
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2005 Ford Thunderbird50th Anniversary Edition, Base, James Bond Edition, Neiman Marcus, Pacific Coast Roadster8 Cyl 3.9 L GAS
    2000-2006 Lincoln LSAppearance, Base, LSE, Luxury, Premium, Sport, Ultimate6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 6W4Z-3085-AA the part I need for my vehicle? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 6W4Z-3085-AA fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    When should the lower arm-to-frame nuts or upper arm-to-body nuts be tightened for the 2004 Ford Thunderbird? Posted by Customer
    A:
    Do not tighten them until the installation is complete and the vehicle's weight is resting on the wheel and tire assemblies.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What should be confirmed before connecting the upper control arm to the knuckle for the 2002 Ford Thunderbird? Posted by Customer
    A:
    Confirm that the tapered washer is installed on the ball joint.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    How do you adjust the hub-to-fender distance for the 2005 Lincoln LS? Posted by Customer
    A:
    Place a jack stand under the suspension lower arm and raise it until the hub-to-fender distance matches the initial measurement.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What is the installation process for the new lower arm for the 2006 Lincoln LS? Posted by Customer
    A:
    Position the new lower arm onto the subframe and install new lower arm-to-subframe bolts and nuts without tightening them yet.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What is the final step in the process for the 2000 Lincoln LS? Posted by Customer
    A:
    Install new nuts for the lower arm, and reinstall the air cleaner and canister purge valve.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    How should individual suspension components be removed for the 2003 Lincoln LS? Posted by Customer
    A:
    Follow the specified order and utilize the hex holding feature to prevent the stud from turning while removing the nut from ball joints and stabilizer bar links.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done after detaching the wires and electrical connectors for the 2001 Lincoln LS? Posted by Customer
    A:
    Remove three bolts and the bracket, followed by another nut which should also be discarded.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What should be ensured when removing the brake caliper, pads, and anchor plate for the 2004 Lincoln LS? Posted by Customer
    A:
    Ensure the caliper does not hang from the hose to avoid damage.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done while removing the upper control arm ball joint nut for the 2006 Lincoln LS? Posted by Customer
    A:
    Use the hex-holding feature to prevent the upper control arm ball joint from turning and remember to reuse the tapered washer on the ball joint with the new nut.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What is the next step after disconnecting the stabilizer bar link for the 2002 Ford Thunderbird? Posted by Customer
    A:
    Disconnect the suspension lower arm from the knuckle by removing and discarding the nut and bolt.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to service and repair the right side upper control arm for the 2002 Lincoln LS? Posted by Customer
    A:
    Begin by removing and discarding the nut.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done with the tapered washer on the ball joint for the 2005 Ford Thunderbird? Posted by Customer
    A:
    Reuse the tapered washer on the ball joint with the new nut.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What precautions should be taken when removing the brake caliper, pads, and anchor plate for the 2003 Ford Thunderbird? Posted by Customer
    A:
    Ensure the caliper is not allowed to hang from the hose to prevent damage and position these components aside.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Upper Control Arm, Front Driver Side 6W4Z-3085-AA Designed for Proper Fit and Performance

The Ford part 6W4Z-3085-AA Upper Control Arm, Front Driver Side as a genuine Ford Control Arm component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford 6W4Z-3085-AA Upper Control Arm, Front Driver Side is used with Ford Thunderbird vehicles and Lincoln LS models. The original Ford part will bear the manufacturer part number: 6W4Z-3085-AA and where it is made at Ford. It has been specifically developed to fit the Front Upper Driver Side and has the code: 3084.
This component has dimensions of 3.3 x 10.8 x 13.4 inches and its weight is approximately 2.70 Pounds. The part 6W4Z3085AA is available in New condition while meeting the standards of the product rating. The Arm Assembly - Front Suspension; Front Left Upper Control Arm and Ball Joint Assembly. belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part 6W4Z-3085-AA can be known as Suspension Control Arm; Control Arm, and it replaces 4W4Z-3085-AA. The inventory reference for this item is SKU: 6W4Z-3085-AA. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.