My Garage
Cart
Make sure this part fits

Ford 8T4Z-3079-A
Lower Control Arm, Front Driver Side

2007-2015 Ford 8T4Z3079A

Customer Questions & Expert Answers (9)
Ford 8T4Z-3079-A Lower Control Arm, Front Driver Side
Ford 8T4Z-3079-A Lower Control Arm, Front Driver Side
  • Part Description
    Arm Assembly - Front Suspension; Front Left Control Arm and Ball Joint Assembly
  • Base No.
    3078
  • Position
    Front Driver Side
  • Replaces
    7T4Z-3079-AL
  • Manufacturer
    Ford
Make sure this part fits
$174.59 MSRP: $287.27
You Save: $112.68 (40%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.3078
    Manufacturer Part Number8T4Z-3079-A
    Part DescriptionArm Assembly - Front Suspension; Front Left Control Arm and Ball Joint Assembly
    Other NamesControl Arm
    Item Dimensions3.9 x 12.6 x 25.0 inches
    Item Weight16.70 Pounds
    PositionFront Driver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces7T4Z-3079-AL
    ManufacturerFord
    SKU8T4Z-3079-A
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2014 Ford EdgeLimited, SE, SEL, SEL Plus, Sport4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
    2007-2015 Lincoln MKXBase6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
  • Customer Questions & Expert Answers

    Q:
    Will this 8T4Z-3079-A work in my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 8T4Z-3079-A fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to service and repair the lower control arm on Ford Edge? Posted by Customer
    A:
    One must begin the repair of the lower control arm by taking out the spring first. The first step is to remove the cam adjuster nut then take out the cam adjuster before discarding both the cam nut and bolt. The new nut requires tightening force not exceeding 150 Nm (111 lb-ft) during installation. Complete the installation by proceeding with the opposite steps taken during removal.
    Posted by FordPartsDeal Specialist
    Q:
    How to service and repair the lower control arm on Lincoln MKX? Posted by Customer
    A:
    The first step to work on the lower control arm involves taking away the spring from its position. Start by removing the cam adjuster nut before taking off the cam adjuster and cam bolt where you should discard both parts. Follow the reinstallation process by fastening the cam adjuster nut to 150 Nm (111 lb-ft) torque specifications and reverse the steps for removal.
    Posted by FordPartsDeal Specialist
    Q:
    What is the procedure for the lower ball joint nut and bolt for the 2007 Ford Edge? Posted by Customer
    A:
    Remove and discard the lower ball joint nut and bolt, and tighten the new bolt to 55 Nm (41 ft. lbs) during installation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done if necessary after completing the installation for the 2009 Ford Edge? Posted by Customer
    A:
    Check and align the front end if necessary.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What is the torque specification for the stabilizer bar link lower nut for the 2008 Ford Edge? Posted by Customer
    A:
    Tighten it to 90 Nm (66 lb-ft).
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    How do you complete the installation for the 2007 Lincoln MKX? Posted by Customer
    A:
    Complete the installation by reversing the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to service and repair the upper control arm for the 2008 Lincoln MKX? Posted by Customer
    A:
    Begin by removing the wheel and tire.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What are the torque specifications for the subframe nuts for the 2009 Lincoln MKX? Posted by Customer
    A:
    Tighten the subframe rearward nut and the subframe forward nut to 90 Nm (66 lb-ft).
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford 8T4Z-3079-A, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # 8T4Z-3079-A Lower Control Arm, Front Driver Side. It is sometimes referred to as Ford Control Arm. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford 8T4Z3079A Lower Control Arm, Front Driver Side. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery