My Garage
Cart
Make sure this part fits

Ford 6W4Z-5500-AB
Upper Control Arm, Rear Driver Side

2000-2006 Ford 6W4Z5500AB

Customer Questions & Expert Answers (14)
Ford 6W4Z-5500-AB Upper Control Arm, Rear Driver Side
Ford 6W4Z-5500-AB Upper Control Arm, Rear Driver Side
  • Part Description
    Arm Assembly - Rear Suspension; Rear Left Upper Control Arm and Ball Joint Assembly.
  • Base No.
    5500
  • Position
    Rear Upper Driver Side
  • Replaces
    2W4Z-5500-ZZ
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2005 Ford Thunderbird50th Anniversary Edition, Base, James Bond Edition, Neiman Marcus, Pacific Coast Roadster8 Cyl 3.9 L GAS
    2000-2006 Lincoln LSAppearance, Base, LSE, Luxury, Premium, Sport, Ultimate6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 6W4Z-5500-AB the part I need for my vehicle? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 6W4Z-5500-AB fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    What should be applied to the wheel bearing and hub assembly during installation for the 2004 Ford Thunderbird? Posted by Customer
    A:
    Apply a light coat of lubricant to the bearing/knuckle mating surfaces.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done with the shock absorber upper mount-to-body nuts for the 2005 Ford Thunderbird? Posted by Customer
    A:
    Remove and discard the two shock absorber upper mount-to-body nuts, tightening them to 28 Nm (21 ft. lbs.) upon reinstallation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    How do you connect the lower arm to the wheel knuckle for the 2006 Lincoln LS? Posted by Customer
    A:
    Use a new nut and bolt, tightening it to 150 Nm (111 ft. lbs.), and avoid air tools to prevent boot damage.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    When should the lower arm-to-frame nuts be tightened for the 2003 Ford Thunderbird? Posted by Customer
    A:
    Do not tighten them until the installation is complete and the vehicle's weight is on the wheel and tire assemblies.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What is the process for connecting the stabilizer bar link to the suspension lower arm for the 2002 Ford Thunderbird? Posted by Customer
    A:
    Pry down on the bar and install a new nut.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done for the installation of the new suspension upper arm for the 2000 Lincoln LS? Posted by Customer
    A:
    Position the new suspension upper arm and install a new bolt, ensuring the tapered washer is in place before connecting the upper control arm to the knuckle.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What should be used to prevent the stud from turning while removing the nut for the 2002 Ford Thunderbird? Posted by Customer
    A:
    Utilize the hex holding feature.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    How can you prevent knuckle movement during the process for the 2002 Lincoln LS? Posted by Customer
    A:
    Wire the top of the wheel knuckle to the body.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to service and repair the front control arm for the 2004 Lincoln LS? Posted by Customer
    A:
    Place the vehicle in NEUTRAL and position it on a hoist.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What should be confirmed before connecting the upper control arm to the knuckle for the 2001 Lincoln LS? Posted by Customer
    A:
    Confirm that the tapered washer is installed on the ball joint.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What is the final step for the wheel bearing and hub assembly installation for the 2003 Lincoln LS? Posted by Customer
    A:
    Apply a light coat of lubricant to the bearing/knuckle mating surfaces.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done with the power steering reservoir nut for the 2006 Lincoln LS? Posted by Customer
    A:
    Remove and discard the power steering reservoir nut, then position the power steering reservoir aside.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    How do you remove the suspension upper arm for the 2005 Lincoln LS? Posted by Customer
    A:
    Remove the suspension upper arm by taking out the suspension upper arm-to-subframe nuts and bolts, discarding them as well.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Upper Control Arm, Rear Driver Side 6W4Z-5500-AB Designed for Proper Fit and Performance

The Ford part 6W4Z-5500-AB Upper Control Arm, Rear Driver Side as a genuine Ford Control Arm component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford 6W4Z-5500-AB Upper Control Arm, Rear Driver Side is used with Ford Thunderbird vehicles and Lincoln LS models. The original Ford part will bear the manufacturer part number: 6W4Z-5500-AB and where it is made at Ford. It has been specifically developed to fit the Rear Upper Driver Side and has the code: 5500.
This component has dimensions of 3.8 x 12.6 x 12.2 inches and its weight is approximately 4.20 Pounds. The part 6W4Z5500AB is available in New condition while meeting the standards of the product rating. The Arm Assembly - Rear Suspension; Rear Left Upper Control Arm and Ball Joint Assembly. belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part 6W4Z-5500-AB can be known as Suspension Control Arm; Control Arm, and it replaces 2W4Z-5500-ZZ. The inventory reference for this item is SKU: 6W4Z-5500-AB. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.