My Garage
Cart
Make sure this part fits

Ford F6DZ-5500-CB
Upper Control Arm, Rear Passenger Side

1996-2005 Ford F6DZ5500CB

Customer Questions & Expert Answers (13)
Ford F6DZ-5500-CB Upper Control Arm, Rear Passenger Side
  • Part Description
    Arm Assembly - Rear Suspension; Suspension Control Arm, Rear Right Upper
  • Base No.
    5500
  • Position
    Rear Upper Passenger Side
  • Manufacturer
    Ford
Make sure this part fits
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.5500
    Manufacturer Part NumberF6DZ-5500-CB
    Part DescriptionArm Assembly - Rear Suspension; Suspension Control Arm, Rear Right Upper
    Other NamesSuspension Control Arm; Control Arm
    Manufacturer NoteRH, Upper
    Item Dimensions19.4 x 7.2 x 13.4 inches
    Item Weight14.90 Pounds
    PositionRear Upper Passenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKUF6DZ-5500-CB
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1996-2005 Ford TaurusG, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
    1996-2005 Mercury SableG, GS, LS, LS Premium, Platinum Edition6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you verify if F6DZ-5500-CB is the right one for my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number F6DZ-5500-CB fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to service and repair the upper control arm on Ford Taurus? Posted by Customer
    A:
    Service and repair operations on the upper control arm start with hub cap removal followed by measurement from hub center to fender lip at vehicle ground level to determine curb height. You should start by taking off the wheel and tire setup while dismissing the nut before separating the upper control arm. The complete upper control arm extraction requires removing two flag nuts and bolts followed by discarding them. You should set the new control arm into position before installing two bolts and flag nuts that remain loose at first. The upper control arm installation requires you to connect it while adding a fresh nut. A jack stand needs to be placed underneath for suspension elevation until both the fender rim edge and hub center space equals the recorded curb height and then the two mounting bolts should be tightened. Below is the process for reinstallation: Remove the jack stand and lower suspension before correctly installing wheel and tire assembly. The completion of wheel alignment checks should lead to appropriate modifications.
    Posted by FordPartsDeal Specialist
    Q:
    What is crucial to remember during the installation of the lower arm for the 2003 Ford Taurus? Posted by Customer
    A:
    Do not tighten the lower arm-to-body nut until the suspension is at ride height during spring installation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    Why is it important to follow the specified torque values for the 2002 Ford Taurus? Posted by Customer
    A:
    To ensure proper retention of these components, as suspension fasteners are critical components that affect the performance of vital systems.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done for the rear lower control arm for the 2001 Ford Taurus? Posted by Customer
    A:
    Remove the nut, flag bolt, and the arm, discarding the nut and flag bolt.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step in servicing and repairing the lower control arm on a wagon for the 2005 Ford Taurus? Posted by Customer
    A:
    Begin by removing the spring.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What additional steps are needed for the front lower control arm for the 2005 Mercury Sable? Posted by Customer
    A:
    Also remove and discard the nut and flag bolt, then take out the front lower control arm and the adjusting cam.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step in servicing and repairing the lower control arm on a wagon for the 2000 Mercury Sable? Posted by Customer
    A:
    Begin by removing the spring.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done after removing the wheel and tire assembly for the 2000 Mercury Sable? Posted by Customer
    A:
    For the front lower control arms, remove the bolt and detach the parking brake cable along with the rear anti-lock brake sensor wiring harness if equipped.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done regarding parts replacement for the 2001 Mercury Sable? Posted by Customer
    A:
    Always install a new part with the same part number or an equivalent part.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What steps are involved in removing the front lower control arms for the 2004 Mercury Sable? Posted by Customer
    A:
    Remove the bolt and detach the parking brake cable along with the rear anti-lock brake sensor wiring harness if equipped. Then, remove the nut, washer, and flag bolt to detach the lower control arm from the spindle, discarding the nut and flag bolt. Also, remove and discard the nut and flag bolt for the front lower control arm, then take out the front lower control arm and the adjusting cam.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What steps are involved in removing the front lower control arms for the 2003 Mercury Sable? Posted by Customer
    A:
    Remove the bolt and detach the parking brake cable along with the rear anti-lock brake sensor wiring harness if equipped. Then, remove the nut, washer, and flag bolt to detach the lower control arm from the spindle, discarding the nut and flag bolt.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    Q:
    What is the next step after positioning the rear lower suspension arm for the 2002 Mercury Sable? Posted by Customer
    A:
    Install a new flag bolt and nut without tightening it at this time.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Control Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford F6DZ-5500-CB, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # F6DZ-5500-CB Upper Control Arm, Rear Passenger Side. It is sometimes referred to as Ford Control Arm. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford F6DZ5500CB Upper Control Arm, Rear Passenger Side. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery