Ford F75Z-5B326-AM
Torsion Bar, Front

A technician must activate the air suspension switch inside the RH kick panel area to cut power from the system because servicing the torsion bar requires this step to stop unexpected air spring operations. The first step requires lifting the vehicle with support while marking and measuring the torsion bar and crossmember support. Use the Torsion Bar Tool with Adapters in B slots to reduce torsion bar tension by tightening the tool until the adjuster lifts off the adjuster nut followed by removing the adjuster nut, adjuster and Torsion Bar Tool. The removal process starts by detached the torsion bar crossmember support bolts and nuts before you can proceed with taking out the crossmember support and torsion bars. The installation process begins with placing both torsion bars and torsion bar crossmember support beforesecuring the support bolts followed by nuts. The procedure to load the torsion bar begins with installing the torsion bar adjuster before aligning its reference marks while you utilize the Torsion Bar Tool with its adapters to load the bar after which you should install the adjuster nut and bolt followed by removing the tool. Finish the procedure by raising or lowering the car height.