Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Ford F4TZ-2B121-B
Caliper Assembly, Front Driver Side

1994-2004 Ford F4TZ2B121B

Customer Questions & Expert Answers (8)
Ford F4TZ-2B121-B Caliper Assembly, Front Driver Side
  • Part Description
    Caliper Assembly - Brake; Disc Brake Caliper, Front Left; Brake Caliper Repair Kit; Brake Caliper
  • Base No.
    2B121
  • Position
    Front Driver Side
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • F4TZ-2B121-B Caliper Assembly, Front Driver Side is Ref No. 17 in the diagram below

    1994 Ford F-350 Caliper Assembly, Front Driver Side Diagram for F4TZ-2B121-B
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for F4TZ-2B121-B

  • Product Specifications

    BrandGenuine Ford
    Base No.2B121
    Manufacturer Part NumberF4TZ-2B121-B
    Part DescriptionCaliper Assembly - Brake; Disc Brake Caliper, Front Left; Brake Caliper Repair Kit; Brake Caliper
    Other NamesCaliper
    Manufacturer NoteCaliper asy. - LH - 1994/96 F-Series, Bronco - 1994/2003 E-series - w/o pads and anchor bracket
    Item Dimensions6.1 x 6.6 x 9.1 inches
    Item Weight10.00 Pounds
    PositionFront Driver Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKUF4TZ-2B121-B
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    1994-1996 Ford BroncoEddie Bauer, XL, XLT, XLT Sport8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
    2003-2004 Ford E-150Base6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
    2003-2004 Ford E-150 Club WagonChateau, XL, XLT6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
    1994-2002 Ford E-150 EconolineBase, XL6 Cyl 4.2 L GAS, 6 Cyl 4.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
    1994-2002 Ford E-150 Econoline Club WagonChateau, Custom, XL, XLT6 Cyl 4.2 L GAS, 6 Cyl 4.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
    1994-1996 Ford F-150Eddie Bauer, Lightning, Special, XL, XLT6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
    1994-1996 Ford F-250Eddie Bauer, Special, XL, XLT6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.5 L GAS
    1994-1996 Ford F-350Eddie Bauer, Special, XL, XLT6 Cyl 4.9 L GAS, 8 Cyl 5.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.5 L GAS

  • Customer Questions & Expert Answers

    Q:
    Can you verify if F4TZ-2B121-B is the right one for my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number F4TZ-2B121-B fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to service and repair a brake caliper on Ford E-150 Econoline? Posted by Customer
    A:
    Start the brake caliper maintenance by taking out the disc brake caliper before draining the brake fluid. The caliper should be placed in a vise while steady air pressure through the fluid port forces the piston out through a small wooden piece between the piston and the caliper bridge. Keeping the wood block aside discard both the piston assemblys and dust boots. Honing the caliper cylinder bores is unnecessary because only new front brake calipers should be used when the bores become damaged. New piston seals together with new dust boots must be used during assembly to protect the vehicle and fresh brake fluid needs to be employed throughout the assembly and bleeding procedures. Apply High Performance DOT 3 Motor Vehicle Brake Fluid C6AZ-19542-AB or equivalent to the piston dust boot and seal and caliper piston and cylinder bore following Ford specification ESA-M6C25-A. Put the products in place while being mindful of causing any damage. Use a steady pressure to push the caliper piston inside the bore until it reaches the proper position without coil formation then mount the disc brake caliper.
    Posted by FordPartsDeal Specialist
    Q:
    How can contamination and air entry be prevented when disconnecting the front brake hose for the 2000 Ford E-150 Econoline? Posted by Customer
    A:
    Always plug a disconnected front brake hose before disconnecting it from the disc brake caliper.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Caliper
    Q:
    Why is it important not to hone the caliper cylinder bores for the 2003 Ford E-150? Posted by Customer
    A:
    Caliper pistons are not available for honed calipers; if the bores are damaged, a new front disc brake caliper must be installed.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Caliper
    Q:
    What should be done after positioning the disc brake caliper for the 2001 Ford E-150 Econoline? Posted by Customer
    A:
    Install and tighten the disc brake caliper bolts.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Caliper
    Q:
    What is the first step in servicing and repairing the brake caliper for the 2004 Ford E-150? Posted by Customer
    A:
    Begin by removing the rear disc brake caliper and draining the remaining brake fluid.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Caliper
    Q:
    What is the first step to service and repair the brake caliper on the E-150 for the 2004 Ford E-150? Posted by Customer
    A:
    Begin by removing the rear disc brake caliper anchor plate.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Caliper
    Q:
    What type of lubricant should not be used during installation for the 2002 Ford E-150 Econoline? Posted by Customer
    A:
    Petroleum-based lubricant should not be used to avoid deterioration.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Caliper
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford F4TZ-2B121-B, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # F4TZ-2B121-B Caliper Assembly, Front Driver Side. It is sometimes referred to as Ford Brake Caliper. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford F4TZ2B121B Caliper Assembly, Front Driver Side. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery