My Garage
Cart
Make sure this part fits

Ford AT4Z-17757-B
Impact Bar, Front

2007-2015 Ford AT4Z17757B

Customer Questions & Expert Answers (10)
Ford AT4Z-17757-B Impact Bar, Front
  • Part Description
    Bumper Assembly - Front; Bumper Impact Bar, Front
  • Base No.
    17757
  • Position
    Front
  • Replaces
    7T4Z-17757-A, AT4Z-17757-A
  • Manufacturer
    Ford
Make sure this part fits
$162.25 MSRP: $200.31
You Save: $38.06 (19%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.17757
    Manufacturer Part NumberAT4Z-17757-B
    Part DescriptionBumper Assembly - Front; Bumper Impact Bar, Front
    Item Dimensions9.7 x 8.4 x 44.7 inches
    Item Weight15.80 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces7T4Z-17757-A, AT4Z-17757-A
    ManufacturerFord
    SKUAT4Z-17757-B
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2014 Ford EdgeLimited, SE, SEL, SEL Plus, Sport4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
    2007-2015 Lincoln MKXBase6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you verify if AT4Z-17757-B is the right one for my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number AT4Z-17757-B fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to service and repair the front bumper cover on Ford Edge? Posted by Customer
    A:
    Maintenance and repair operations for the front bumper cover should begin by placing the vehicle in NEUTRAL gear when it rests on a hoist. The service of front bumper cover starts by removing two top bolts and four scrivets from the radiator grille then progressing to three lower pin-type retainers. The service begins by unscrewing the 6 fender splash shield screws that include 3 screws on each side followed by removing the 4 lower screws situated 2 on each side. Remove the electrical connections from side marker lamps and fog lamps whenever available. Descent the front bumper cover by gently pulling its corner from the bracket now that all prior steps are finished. The procedure ends by performing an exact reversal of the uninstallation process.
    Posted by FordPartsDeal Specialist
    Q:
    What is the next step after disconnecting the wiring harness for the 2009 Ford Edge? Posted by Customer
    A:
    Disconnect the retainers from the rear bumper cover-to-body brace.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Bumper
    Q:
    How many nuts connect the bumper to the radiator support for the 2007 Ford Edge? Posted by Customer
    A:
    There are 6 nuts connecting the bumper to the radiator support, with 3 nuts on each side.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Bumper
    Q:
    What is the next step after disconnecting the wiring harness for the 2008 Ford Edge? Posted by Customer
    A:
    Disconnect the retainers from the rear bumper cover-to-body brace.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Bumper
    Q:
    How many front bumper bolts need to be removed for the 2008 Lincoln MKX? Posted by Customer
    A:
    Six front bumper bolts need to be removed, with three on each side.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Bumper
    Q:
    What should be done after removing the front bumper cover for the 2008 Lincoln MKX? Posted by Customer
    A:
    Take off the 2 nuts securing the power steering cooler pipe to the lower front bumper, ensuring to tighten them to 7 Nm (62 lb-in) upon reinstallation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Bumper
    Q:
    What should be removed from the top of the radiator grille for the 2008 Lincoln MKX? Posted by Customer
    A:
    Remove the 2 bolts and 4 scrivets.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Bumper
    Q:
    How do you remove the rear bumper cover for the 2007 Lincoln MKX? Posted by Customer
    A:
    Proceed to remove the rear bumper cover from the bumper cover bracket.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Bumper
    Q:
    What is the first step to remove the front bumper cover for the 2009 Ford Edge? Posted by Customer
    A:
    Ensure the vehicle is in NEUTRAL and positioned on a hoist.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Bumper
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford AT4Z-17757-B, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # AT4Z-17757-B Impact Bar, Front. It is sometimes referred to as Ford Bumper. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford AT4Z17757B Impact Bar, Front. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery