My Garage
Cart
Make sure this part fits

Ford 7C2Z-2C219-FA
Control Valve

2002-2007 Ford 7C2Z2C219FA

Customer Questions & Expert Answers (10)
Ford 7C2Z-2C219-FA Control Valve
  • Part Description
    Control; ABS Control Module
  • Base No.
    2C219
  • Replaces
    6C2Z-2C219-FA, 6C2Z-2C219-BA
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2007 Ford E-150Base, Chateau, XL, XLT6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
    2003-2005 Ford E-150 Club WagonChateau, XL, XLT6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
    2002 Ford E-150 EconolineBase6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
    2002 Ford E-150 Econoline Club WagonChateau, XL, XLT6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
    2003-2007 Ford E-250Base6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
    2002 Ford E-250 EconolineBase6 Cyl 4.2 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
    2003-2005 Ford E-350 Club WagonChateau, XL, XLT10 Cyl 6.8 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
    2002 Ford E-350 Econoline Club WagonChateau, XL, XLT10 Cyl 6.8 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
    2002-2007 Ford E-350 Super DutyBase, Chateau, XL, XLT10 Cyl 6.8 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you verify if 7C2Z-2C219-FA is the right one for my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 7C2Z-2C219-FA fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How do you set up for bleeding the brake system for the 2006 Ford E-250? Posted by Customer
    A:
    Connect a clear waste line to the right-hand (RH) rear bleeder screw, submerging the other end in a container with clean DOT 3 brake fluid.
    Posted by FordPartsDeal Specialist
    See expert answers on similar ABS Control Module
    Q:
    What should be done to prevent brake fluid spillage before disconnecting the HCU for the 2007 Ford E-250? Posted by Customer
    A:
    Ensure to plug each port of the hydraulic control unit (HCU).
    Posted by FordPartsDeal Specialist
    See expert answers on similar ABS Control Module
    Q:
    What is the first step to service and repair the Electronic Brake Control Module for the 2004 Ford E-250? Posted by Customer
    A:
    Begin by removing the Hydraulic Control Unit (HCU).
    Posted by FordPartsDeal Specialist
    See expert answers on similar ABS Control Module
    Q:
    How do you remove the anti-lock brake control module for the 2003 Ford E-250? Posted by Customer
    A:
    Unscrew the screws and take out the module.
    Posted by FordPartsDeal Specialist
    See expert answers on similar ABS Control Module
    Q:
    What additional steps are required for those equipped with traction control and stability assist for the 2006 Ford E-150? Posted by Customer
    A:
    Calibrate the ABS module according to the diagnostic tool directions, clear any Diagnostic Trouble Codes (DTCs), and perform a self-test with the brakes not applied.
    Posted by FordPartsDeal Specialist
    See expert answers on similar ABS Control Module
    Q:
    What is the first step to service and repair the Electronic Brake Control Module for the 2005 Ford E-250? Posted by Customer
    A:
    Disconnect the battery.
    Posted by FordPartsDeal Specialist
    See expert answers on similar ABS Control Module
    Q:
    What is the first step to service and repair the Electronic Brake Control Module for the 2007 Ford E-150? Posted by Customer
    A:
    Disconnect the battery ground.
    Posted by FordPartsDeal Specialist
    See expert answers on similar ABS Control Module
    Q:
    How do you initiate the bleeding process for the RH rear bleeder screw for the 2002 Ford E-150 Econoline? Posted by Customer
    A:
    Loosen the RH rear bleeder screw until a stream of brake fluid flows out, then have an assistant maintain pressure on the brake pedal while tightening the screw.
    Posted by FordPartsDeal Specialist
    See expert answers on similar ABS Control Module
    Q:
    How do you install the components after servicing for the 2002 Ford E-250 Econoline? Posted by Customer
    A:
    Reverse the removal procedure to secure the anti-lock brake control module and reattach the bracket to the HCU.
    Posted by FordPartsDeal Specialist
    See expert answers on similar ABS Control Module
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Control Valve 7C2Z-2C219-FA Designed for Proper Fit and Performance

The Ford part 7C2Z-2C219-FA Control Valve as a genuine Ford ABS Control Module, Brake Controller component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford 7C2Z-2C219-FA Control Valve is used with Ford E-150 Econoline, E-150, E-150 Club Wagon models. The original Ford part will bear the manufacturer part number: 7C2Z-2C219-FA and where it is made at Ford. It has the code: 2C219.
This component has dimensions of 7.5 x 4.6 x 4.2 inches and its weight is approximately 2.00 Pounds. The part 7C2Z2C219FA is available in New condition while meeting the standards of the product rating. The Control; ABS Control Module belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part 7C2Z-2C219-FA can be known as Control Module, and it replaces 6C2Z-2C219-FA, 6C2Z-2C219-BA. The inventory reference for this item is SKU: 7C2Z-2C219-FA. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.