Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Ford 9L3Z-18107A94-A
Rear Crossmember

2005-2014 Ford 9L3Z18107A94A

Customer Questions & Expert Answers (4)
Ford 9L3Z-18107A94-A Rear Crossmember
  • Part Description
    Cross Member Assembly - Rear Seat; Floor Pan Crossmember, Rear
  • Base No.
    <107A94
  • Position
    Rear
  • Replaces
    5L3Z-18107A94-AA, 8L3Z-18107A94-A
  • Manufacturer
    Ford
Make sure this part fits
$171.91 MSRP: $265.30
You Save: $93.39 (36%)
1
ADD TO CART

  • 9L3Z-18107A94-A Rear Crossmember is Ref No. 7 in the diagram below

    2012 Ford F-150 Rear Crossmember Diagram for 9L3Z-18107A94-A
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 9L3Z-18107A94-A

  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2014 Ford F-150FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, SVT Raptor, THE 60TH ANNIVERSARY EDITION, XL, XLT6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L GAS
    2006-2008 Lincoln Mark LTBase8 Cyl 5.4 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 9L3Z-18107A94-A compatible with my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 9L3Z-18107A94-A fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How is the Rear Crossmember Serviced on Lincoln Mark LT? Posted by Customer
    A:
    The repair of the rear cross-member begins when you put the vehicle onto a hoist while setting the transmission gear to neutral. The exhaust hanger bolts need removal while also ensuring a 40 Nm (30 lb-ft) torque on these bolts when reinstalling. After removing the two heat shield screws service technicians should tighten them to 20 Nm (15 lb-ft) prior to replacement. A suitable jack must sustain the transmission before removing the two support nuts that require a torque specification of 76 lb-ft (103 Nm). The four transmission support crossmember bolts must be removed while you should torque them to 115 Nm (85 lb-ft) before reinstalling. Finish the project by putting back the transmission support crossmember while following the reverse steps of removal.
    Posted by FordPartsDeal Specialist
    Q:
    How to Service the Rear Crossmember on Lincoln Mark LT? Posted by Customer
    A:
    The vehicle needs to be positioned on a hoist with neutral transmission while performing rear cross-member servicing. After removing the two exhaust hanger bolts you should tighten them to 40 Nm (30 lb-ft) torque specification during reinstallation. The service on the heat shield requires you to remove two bolts that must be tightened to 20 Nm when reinstalling. Apply a suitable transmission jack for support before taking out the two transmission support nuts while tightening them to 103 Nm (76 lb-ft) during the install process. The next step requires removal of the four transmission support crossmember bolts before tightening them to 115 Nm (85 lb-ft) torque upon reinstallation. To complete the task follow the reverse order of disassembly by reinstalling the transmission support crossmember.
    Posted by FordPartsDeal Specialist
    Q:
    What is the next step after removing the exhaust hanger bolts for the 2005 Ford F-150? Posted by Customer
    A:
    Take out the two heat shield bolts.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Rear Crossmember
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Rear Crossmember 9L3Z-18107A94-A Designed for Proper Fit and Performance

The Ford part 9L3Z-18107A94-A Rear Crossmember as a genuine Ford Rear Crossmember component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford 9L3Z-18107A94-A Rear Crossmember is used with Ford F-150 vehicles and Lincoln Mark LT models. The original Ford part will bear the manufacturer part number: 9L3Z-18107A94-A and where it is made at Ford. It has been specifically developed to fit the Rear and has the code: <107A94.
This component has dimensions of 70.1 x 5.6 x 5.4 inches and its weight is approximately 12.30 Pounds. The part 9L3Z18107A94A is available in New condition while meeting the standards of the product rating. The Cross Member Assembly - Rear Seat; Floor Pan Crossmember, Rear belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part 9L3Z-18107A94-A can be known as Crossmember, and it replaces 5L3Z-18107A94-AA, 8L3Z-18107A94-A. The inventory reference for this item is SKU: 9L3Z-18107A94-A. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.