My Garage
Cart
Make sure this part fits

Ford 7L1Z-78611D10-A
Side Impact Inflator Module, Front

2007-2014 Ford 7L1Z78611D10A

Customer Questions & Expert Answers (7)
Ford 7L1Z-78611D10-A Side Impact Inflator Module, Front
  • Part Description
    Module - Air Bag; Seat Air Bag, Front
  • Base No.
    <611D10
  • Position
    Front
  • Manufacturer
    Ford
Make sure this part fits
$182.00 MSRP: $264.92
You Save: $82.92 (32%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2014 Ford ExpeditionEddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
    2007-2014 Lincoln NavigatorBase, L, L Luxury, L Ultimate, Luxury, Ultimate8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you verify if 7L1Z-78611D10-A is the right one for my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 7L1Z-78611D10-A fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How should the driver air bag module wire clips be released for the 2008 Ford Expedition? Posted by Customer
    A:
    Use a mirror to locate the clips and push them toward the center of the steering wheel to release.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Air Bag
    Q:
    What should be done if any faults are indicated for the 2009 Ford Expedition? Posted by Customer
    A:
    Clear all continuous memory DTCs from the RCM using a scan tool.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Air Bag
    Q:
    What is the process for depowering the system and removing the steering column covers for the 2007 Ford Expedition? Posted by Customer
    A:
    Depower the system, remove the lower steering column opening cover by unscrewing three screws, and take out the manual tilt lever screw. Next, remove the three lower shroud screws, release the clips, and take off the upper shroud, followed by the lower shroud, disconnecting the power tilt switch if equipped.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Air Bag
    Q:
    What actions are required if deployable devices have deployed or if DTC B1231 is present for the 2007 Lincoln Navigator? Posted by Customer
    A:
    All deployed devices must be removed and replaced with new ones, along with new impact sensors and a new restraints control module (RCM).
    Posted by FordPartsDeal Specialist
    See expert answers on similar Air Bag
    Q:
    What should be done if the seat side air bag cover is damaged for the 2009 Lincoln Navigator? Posted by Customer
    A:
    Install a new seat side air bag module without attempting repairs.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Air Bag
    Q:
    What should be ensured during installation of the passenger air bag module for the 2008 Lincoln Navigator? Posted by Customer
    A:
    Ensure all deployment door clips are fully seated into the instrument panel, then reverse the removal procedure and repower the SRS.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Air Bag
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Side Impact Inflator Module, Front 7L1Z-78611D10-A Designed for Proper Fit and Performance

The Ford part 7L1Z-78611D10-A Side Impact Inflator Module, Front as a genuine Ford Air Bag component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford 7L1Z-78611D10-A Side Impact Inflator Module, Front is used with Ford Expedition vehicles and Lincoln Navigator models. The original Ford part will bear the manufacturer part number: 7L1Z-78611D10-A and where it is made at Ford. It has been specifically developed to fit the Front and has the code: <611D10.
This component has dimensions of 6.1 x 5.7 x 14.3 inches and its weight is approximately 1.40 Pounds. The part 7L1Z78611D10A is available in New condition while meeting the standards of the product rating. The Module - Air Bag; Seat Air Bag, Front belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part 7L1Z-78611D10-A can be known as Front Seat Air Bag. Every vehicle demands 2 of this component. The inventory reference for this item is SKU: 7L1Z-78611D10-A. Additional manufacturer-provided details include: RH/LH. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.