My Garage
Cart
Make sure this part fits

Ford 6C2Z-17508-AARM
Wiper Motor, Front

1995-2004 Ford 6C2Z17508AARM

Customer Questions & Expert Answers (4)
Ford 6C2Z-17508-AARM Wiper Motor, Front
Ford 6C2Z-17508-AARM Wiper Motor, Front
  • Part Description
    Remanufactured Motor And Linkage Assembly; Windshield Wiper Motor, Front
  • Base No.
    17V508
  • Position
    Front
  • Replaces
    6C2Z-17508-A, F7UZ-17508-AA, 6C2Z-17V508-ABRM, 6C2Z-17V508-AA
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2004 Ford E-150Base6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
    2003-2004 Ford E-150 Club WagonChateau, XL, XLT6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
    1995-2002 Ford E-150 EconolineBase, XL6 Cyl 4.2 L GAS, 6 Cyl 4.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
    1995-2002 Ford E-150 Econoline Club WagonChateau, Custom, XL, XLT6 Cyl 4.2 L GAS, 6 Cyl 4.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
    2003-2004 Ford E-250Base6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
    1995-2002 Ford E-250 EconolineBase, XL6 Cyl 4.2 L GAS, 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
    2003-2004 Ford E-350 Club WagonChateau, XL, XLT10 Cyl 6.8 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
    1995-1998 Ford E-350 EconolineBase, XL10 Cyl 6.8 L GAS, 6 Cyl 4.9 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.5 L GAS
    1995-2002 Ford E-350 Econoline Club WagonChateau, Chateau HD, Custom, XL, XL HD, XLT, XLT HD10 Cyl 6.8 L GAS, 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.5 L GAS
    1999-2004 Ford E-350 Super DutyBase, XL10 Cyl 6.8 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 6C2Z-17508-AARM the part I need for my vehicle? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 6C2Z-17508-AARM fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to service the wiper motor on Ford E-250 Econoline? Posted by Customer
    A:
    Service of the wiper motor requires first removing windshield wiper pivot arms and then opening the hood for proper access. First disconnect the windshield wiper pivot shaft before separating the mounting arm from the cowl top vent panels. First remove the dash panel access cover followed by disconnection of the retaining clip and windshield wiper mounting arm and pivot shaft from the windshield wiper motor. The wiper motor service procedure begins by disconnecting the electrical connector followed by removing the bolts until the entire motor can be removed. Start by returning the retaining clip to the windshield wiper mounting arm and pivot shaft and position the windshield wiper motor into the dash panel before bolt installation. Reconnect the electrical connector before mounting the windshield wiper mounting arm and pivot shaft to the motor position by pressing upward to achieve proper alignment. To finish the installation procedure replace the access cover which is located in both the dash panel and the cowl top vent panels.
    Posted by FordPartsDeal Specialist
    Q:
    How to service and repair the windshield wiper motor on Ford E-150? Posted by Customer
    A:
    The windshield wiper motor servicing starts by removing its arms and hood lifting to gain better access. The first step includes removing the cowl top vent panels followed by disconnecting the windshield wiper mounting arm and pivot shaft. First remove the dash panel access cover and disconnect the wiper mounting arm through removing its retaining clip and disengaging it from the motor pivot shaft. First disconnect the electrical connector as well as remove the bolts which secure the windshield wiper motor before finally removing the motor itself. Begin installation by attaching the retaining clip to the windshield wiper mounting arm and pivot shaft before putting the new windshield wiper motor into the dash panel to bolt it in position. You should connect the electrical connector while aligning the windshield wiper mounting arm and pivot shaft with the motor by pressing upwards to join them. The installation process ends with placing the dashboard access cover in position and afterwards attaching both cowl top vent panels together before reconnecting pivot arms at the windshield wipers.
    Posted by FordPartsDeal Specialist
    Q:
    How to service and repair the wiper motor on Ford E-150 Econoline? Posted by Customer
    A:
    Start the service or repair of the wiper motor by disconnecting the windshield wiper pivot arms and raising the hood for adequate access. The service on wiper motor starts by removing the cowl top vent panels followed by disconnecting the windshield wiper mounting arm and pivot shaft. Take out the access panel from the dash area before you remove the retaining clip to separate the windshield wiper mounting arm and pivot shaft from the wiper motor. Disconnect the electrical connector before you remove the bolts which enables you to pull out the windshield wiper motor. The first step of installation involves placing the retaining clip onto the windshield wiper mounting arm and pivot shaft before positioning the windshield wiper motor inside the dash panel where you will install the bolts along with reconnecting the electrical connector. To connect these components you must press upward and align the mounting arm with the shaft after setting it properly against the wiper motor. The installation process ends with placement of the access cover inside the dash panel and the cowl top vent panels and windshield wiper pivot arms.
    Posted by FordPartsDeal Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Wiper Motor, Front 6C2Z-17508-AARM Designed for Proper Fit and Performance

The Ford part 6C2Z-17508-AARM Wiper Motor, Front as a genuine Ford Wiper Motor component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford 6C2Z-17508-AARM Wiper Motor, Front is used with Ford E-150 Econoline, E-150, E-150 Club Wagon models. The original Ford part will bear the manufacturer part number: 6C2Z-17508-AARM and where it is made at Ford. It has been specifically developed to fit the Front and has the code: 17V508.
This component has dimensions of 10.5 x 6.0 x 7.9 inches and its weight is approximately 4.40 Pounds. The part 6C2Z17508AARM is available in New condition while meeting the standards of the product rating. The Remanufactured Motor And Linkage Assembly; Windshield Wiper Motor, Front belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part 6C2Z-17508-AARM can be known as Motor, and it replaces 6C2Z-17508-A, F7UZ-17508-AA, 6C2Z-17V508-ABRM, 6C2Z-17V508-AA. The inventory reference for this item is SKU: 6C2Z-17508-AARM. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.