Other Name: Motor Assembly - Wiper; Windshield Wiper Linkage; Wiper Motor; Motor & Linkage; Wiper Linkage
Manufacturer Note: Windshield Wiper, Includes Motor And Linkage
Fits the following Ford Models:
Expedition | 2008-2014 | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Other Name: Motor Assembly - Wiper; Back Glass Wiper Motor; Rear Motor
Fits the following Ford Models:
C-Max | 2013-2018 | Energi SE, Energi SEL, Energi Titanium, Hybrid SE, Hybrid SEL, Hybrid Titanium | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Other Name: Linkage Assembly - Wiper; Windshield Wiper Linkage; Arm & Pivot Assembly; Wiper Linkage
Replaces: 6L8Z-17566-BA, 2L8Z-17566-BA
Fits the following Ford Models:
Escape | 2001-2007 | Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
Fusion | 2013-2019 | Energi Platinum, Energi SE, Energi Titanium, Platinum, Platinum Hybrid, S, S Hybrid, SE, SE Hybrid, SEL, SEL Hybrid, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
Police Responder Hybrid | 2019 | Base | 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV)
SSV Plug-In Hybrid | 2019 | Base | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
Q: How to service the wiper motor safely and effectively on Ford Mustang?
A: Prior to servicing the wiper motor take care because the internal permanent magnets made of glass-like material require gentle handling and should never be struck. The wiper service starts with removing the mounting arm along with the pivot shaft followed by removing the bolt which disconnects the arm and shaft from the motor output shaft. Before using the original bolt all users should treat it with Threadlock and torque it to 17 Nm (13 lb-ft). Once you have accomplished the removal of the three windshield wiper motor bolts you should install them by applying 15 Nm (11 lb-ft) of torque. You should reverse the procedure for removal to conduct the actual installation.
Q: How to service the windshield wiper motor on Ford Explorer?
A: The first step to service the windshield wiper motor includes removal of front wiper pivot arms then cowl grille panels starting with right-hand and left-hand sides. The electrical connector and wiring harness from the wiper motor must be detached before you can unfasten and set aside the wiper arm accessory. Tighten the three bolts which hold the windshield wiper assembly to 15 Nm (11 lb-ft) torque when reinstalling the parts. Post the windshield wiper assembly removal from the vehicle carefully install it on a workbench. When reattaching the wiper motor remove its mounting arm bolt and the wiper motor mounting arm by tightening everything to 15 Nm (11 lb-ft). The installation requires you to remove the three mounting bolts of the windshield wiper motor and to tighten them to 15 Nm (11 lb-ft) during installation steps. For installing the windshield wiper motor take out the device and follow the reversal of removal procedures.
Q: How to Ensure Proper Functioning of the Wiper Motor on a Ford Ranger?
A: Servicing the windshield wiper motor requires cycling the wiper blades to straight-up position followed by disconnection of the battery ground cable. The processing starts with disconnecting the electrical connector from the windshield wiper motor followed by removing the right-hand access cover through unscrewing. You need to extend your hand through the access opening until the wiper motor clip becomes free from both the right-hand mounting arm and pivot shaft. You must detach both the right-hand windshield wiper mounting arm and pivot shaft from the left-hand mounting arm and pivot shaft before moving them away from the windshield wiper motor. The windshield wiper motor can be removed through a process which starts with the removal of the stud bolt and bolts. To prevent motor damage lock the mounting arm retainer clip snugly around the motor crank pin when applying it. Reinstall the left-hand mounting arm along with the pivot shaft onto the motor before you apply the right-hand mounting arm and pivot shaft by following the reverse procedure of removal steps. The windshield wiper motor demands replacement because it cannot receive any type of repair.