My Garage
Cart
Make sure this part fits

Ford XF1Z-19E616-CA
Motor Assembly

1996-2007 Ford XF1Z19E616CA

Customer Questions & Expert Answers (17)
Ford XF1Z-19E616-CA Motor Assembly
Ford XF1Z-19E616-CA Motor Assembly
  • Part Description
    HVAC Air Inlet Door Actuator; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Blower Motor
  • Base No.
    19E616
  • Replaces
    F7DZ-19E616-AA
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.19E616
    Manufacturer Part NumberXF1Z-19E616-CA
    Part DescriptionHVAC Air Inlet Door Actuator; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Blower Motor
    Other NamesActuator
    Manufacturer Notew/manual A/C
    Item Dimensions5.2 x 4.4 x 2.2 inches
    Item Weight0.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ReplacesF7DZ-19E616-AA
    ManufacturerFord
    SKUXF1Z-19E616-CA
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2007 Ford TaurusLX, SE, SE Comfort, SEL, SES, SVG6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
    1996-2005 Mercury SableG, GS, LS, LS Premium, Platinum Edition6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
  • Customer Questions & Expert Answers

    Q:
    Do you think this XF1Z-19E616-CA will fit my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number XF1Z-19E616-CA fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    What is the first step to service the temperature blend door actuator for the 2006 Ford Taurus? Posted by Customer
    A:
    Remove the right-hand lower instrument panel insulator.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after removing the screws for the 2001 Ford Taurus? Posted by Customer
    A:
    Take out the temperature blend door actuator.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after removing the instrument panel for the 2007 Ford Taurus? Posted by Customer
    A:
    Take out the two screws securing the vacuum control motor.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the first step to service and repair the air door actuator/motor for the floor console for the 2000 Ford Taurus? Posted by Customer
    A:
    Remove the floor console.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after the instrument panel is removed for the 2004 Ford Taurus? Posted by Customer
    A:
    Take out the screws securing the motor.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the first step to service and repair the air door actuator/motor for the air inlet door for the 2002 Ford Taurus? Posted by Customer
    A:
    First, remove the evaporator and heater core housing, followed by the screws.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the first step to service and repair the air door actuator/motor for the defroster door for the 2003 Ford Taurus? Posted by Customer
    A:
    Begin by removing the passenger air bag module.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after lowering the glove compartment for the 2007 Ford Taurus? Posted by Customer
    A:
    For vehicles equipped with Electronic Automatic Temperature Control (EATC), remove the two screws securing the remote climate control module and position the module aside.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should be done after removing the motor for the 2005 Ford Taurus? Posted by Customer
    A:
    Rotate it to detach it from the floor console register duct door.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the next step after removing the remote climate control module for the 2002 Mercury Sable? Posted by Customer
    A:
    Take off the temperature blend door linkage shield and disconnect the electrical connector from the temperature blend door actuator.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should you do for installation for the 2000 Mercury Sable? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    Why might the heater core and evaporator core housing be shown removed for the 2001 Mercury Sable? Posted by Customer
    A:
    They may be shown removed for clarity.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the next step after removing the screws and shield for the 2003 Mercury Sable? Posted by Customer
    A:
    Label and disconnect the two vacuum hoses, then remove the screw.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What should you be careful about when removing the vacuum control motor for the 2002 Mercury Sable? Posted by Customer
    A:
    Ensure not to bend any part of the floor console register duct door lever.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the first step to service the temperature blend door actuator for the 2005 Mercury Sable? Posted by Customer
    A:
    Remove the right-side lower instrument panel insulator and the temperature blend door linkage shield.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blend Door Actuator
    Q:
    What is the first step to service and repair the air door actuator for the panel/floor door for the 2004 Mercury Sable? Posted by Customer
    A:
    Begin by working through the driver footwell to remove the two screws and the shield.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blend Door Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford XF1Z-19E616-CA, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # XF1Z-19E616-CA Motor Assembly. It is sometimes referred to as Ford Blend Door Actuator. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford XF1Z19E616CA Motor Assembly. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery