My Garage
Cart
Make sure this part fits

Ford 5U2Z-1V125-DC
Rotor

2004-2007 Ford 5U2Z1V125DC

Customer Questions & Expert Answers (7)
Ford 5U2Z-1V125-DC Rotor
  • Part Description
    Rotor Assembly
  • Replaces
    5U2Z-1V125-D, 5U2Z-2V026-DB, BRRF-35, 3F2Z-2C026-AA, BRR-134, BRR-288
  • Manufacturer
    Ford
Make sure this part fits
$70.38 MSRP: $108.32
You Save: $37.94 (36%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Manufacturer Part Number5U2Z-1V125-DC
    Part DescriptionRotor Assembly
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces5U2Z-1V125-D, 5U2Z-2V026-DB, BRRF-35, 3F2Z-2C026-AA, BRR-134, BRR-288
    ManufacturerFord
    SKU5U2Z-1V125-DC
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Ford FreestarBase, Limited, S, SE, SEL, SES6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
    2004-2007 Mercury MontereyBase, Convenience, Luxury, Premier6 Cyl 4.2 L GAS
  • Customer Questions & Expert Answers

    Q:
    Do you think this 5U2Z-1V125-DC will fit my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 5U2Z-1V125-DC fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to service and repair the rear brake disc on Ford Freestar? Posted by Customer
    A:
    Support the brake caliper properly before starting rear brake disc maintenance to prevent its suspension by the flexible hose. Change the two brake caliper anchor plate bolts before setting the brake caliper along with its anchor plate assembly to the side. Next, remove the brake disc. Cleaning operations should be performed on both brake disc and wheel hub before installation through the use of brake parts cleaner. It is essential to protect the wheel studs and brake pads from contact with the lubricant so apply only a thin layer of anti-seize to the hub flange surface. Terminate the process by placing the brake caliper and anchor plate assembly into position and securing it with two new bolts that should be tightened to 102 Nm (75 ft. lbs.).
    Posted by FordPartsDeal Specialist
    Q:
    How to remove and replace the rear brake disc on Mercury Monterey? Posted by Customer
    A:
    Remove the rear brake disc by making a point to avoid letting the caliper and anchor plate assembly hang from the brake hose because doing so can lead to damage. Servicing the rear brake components requires strict attention because disconnecting the parking brake cable from the brake caliper lever presents a risk of damaging its end fittings. The solution is to support the caliper and anchor plate assembly using mechanic's wire. After removing the brake caliper anchor plate bolts you should put aside the caliper and anchor plate assembly. Next, remove the brake disc. Begin your installation by wiping clean all brake disc surface areas and the wheel hub with brake parts cleaner. Students should apply anti-seize lubricant on the hub flange but must place it only in areas separate from wheel studs and both brake pads and brake disc material. Return the brake caliper together with its anchor plate to its proper position and secure two new bolts at 102 Nm (75 ft. lbs).
    Posted by FordPartsDeal Specialist
    Q:
    What is the next step after removing the brake caliper and anchor plate assembly for the 2006 Ford Freestar? Posted by Customer
    A:
    Remove the brake disc.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Disc
    Q:
    How should the brake disc be installed for the 2007 Ford Freestar? Posted by Customer
    A:
    Install the brake disc, aligning it with the marks on the disc and the wheel stud.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Disc
    Q:
    How should the brake disc be installed for the 2005 Mercury Monterey? Posted by Customer
    A:
    Install the brake disc, ensuring the marks on the disc align with the wheel stud.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Disc
    Q:
    What should be applied to the hub flange before installing the brake disc for the 2006 Mercury Monterey? Posted by Customer
    A:
    Apply a thin coat of anti-seize lubricant to the hub flange.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Disc
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford 5U2Z-1V125-DC, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # 5U2Z-1V125-DC Rotor. It is sometimes referred to as Ford Brake Disc. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford 5U2Z1V125DC Rotor. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery