How to remove and install Brake Rotor on 2000-2011 Ford Ranger?

To access front and rear disc brake assemblies, remove the wheel lug nuts, then raise then support the car on jackstands and subsequently remove the wheel. Further on, to release the Rotor for access lift off the brake caliper without disconnecting the brake hose and secure this part provising the hose in loop wire, do not twist this hose. Looking the Rotor surface for score marks and damage; minor grooves are normally present but deep score marks that are in excess of 0.015 inch will require Rotor removal and refinishing by an automotive machine shop. Check the top and bottom of the Rotor and if pulsating occur during this braking assume Rotor runout. For runout control, on a Rotor, fix a dial indicator about half an inch of from the outer edge and rotate it, the zero pistol should not exceed the allowable limit of runout; if it does, refinish the Rotor. If can want a smooth flat Rotor to avoid brake pedal pulsations then it is recommended to resurface brake rotor and if not then de-glaze the surfaces by rubbing with emery cloth or sandpaper in circular or swirling fashion. Make sure that the Rotor has not been machined below the minimum refinish thickness that is embossed on the inside of the Rotor and is measured with a micrometer at three or four positions one half inch from the edge. If it is tight to remove the Rotor from the hub then place a wooden block on the rotor and give light blow through the hammer so that the Rotor become free from the stickiness. For installation the steps are to reverse the removal process and fix the caliper, followed by the wheel with the nuts tightened. Bring the vehicle down to the ground then apply handbrakes, further tighten the lugs nuts to the required torque then pedal the brake several time so that the brake pads make contact with the Rotor. Bleeding is only needed if the brake hose was disconnected from the caliper; to make sure the brakes are working properly before returning to normal use.

OEM Ford Brake Rotor

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

273 Brake Rotors found

View related parts
Ford Rotor, Rear Part Number: CK4Z-2C026-C
$101.42 MSRP: $149.98
You Save: $48.56 (33%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Disc - Brake; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaces: G2MZ-2V026-APA
Fits the following Ford Models:
- Transit | 2015-2019 | 3.2L L5, 3.5L V6, 3.7L V6
- Transit-150 | 2015-2020 | Base, PTV, XL, XLT | 5 Cyl 3.2 L DIESEL, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L GAS, 6 Cyl 3.7 L LPG
- Transit-250 | 2015-2020 | Base, PTV | 5 Cyl 3.2 L DIESEL, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L GAS, 6 Cyl 3.7 L LPG
- Transit-350 | 2015-2020 | Base, PTV, XL, XLT | 5 Cyl 3.2 L DIESEL, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L GAS, 6 Cyl 3.7 L LPG
- Transit-350 HD | 2015-2020 | Base, PTV, XL, XLT | 5 Cyl 3.2 L DIESEL, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L GAS, 6 Cyl 3.7 L LPG
View More
View related parts
Ford Rotor, Rear Part Number: GR3Z-2C026-E
$104.09 MSRP: $157.00
You Save: $52.91 (34%)
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Brake Rotor
- Position: Rear
- Replaces: BRRF-347, BRRF-327, BRRF-245, FR3Z-2C026-B, GR3Z-2C026-D, GR3Z-2C026-B
Fits the following Ford Models:
- Mustang | 2015-2023 | 50th Anniversary Edition, Base, Bullitt, EcoBoost, EcoBoost Premium, GT, GT 50 Years Limited Edition, GT Premium, Mach 1, Shelby GT350, Shelby GT350R, Shelby GT500, Shelby Version, Sub C, V6 | 2.3L L4, 3.7L V6, 4 Cyl 2.3 L GAS, 5.0L V8, 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.2 L GAS
View related parts
Ford Rotor, Front Part Number: CK4Z-1125-H
$120.59 MSRP: $178.33
You Save: $57.74 (33%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Front; Brake Rotor
- Position: Front
- Replaces: BRRF-298, CK4Z-1125-C, BRRF-211, CK4Z-1125-A
Fits the following Ford Models:
- Transit | 2015-2019 | 3.2L L5, 3.5L V6, 3.7L V6
- Transit-150 | 2015-2019 | Base, XL, XLT | 5 Cyl 3.2 L DIESEL, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L GAS, 6 Cyl 3.7 L LPG
- Transit-250 | 2015-2019 | Base, PTV | 5 Cyl 3.2 L DIESEL, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L GAS, 6 Cyl 3.7 L LPG
- Transit-350 | 2015-2019 | Base, XL, XLT | 5 Cyl 3.2 L DIESEL, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L GAS, 6 Cyl 3.7 L LPG
- Transit-350 HD | 2015-2019 | Base, XL, XLT | 5 Cyl 3.2 L DIESEL, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L GAS, 6 Cyl 3.7 L LPG
View More
View related parts
Ford Rotor, Front Part Number: DR3Z-1125-C
$127.63 MSRP: $192.50
You Save: $64.87 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaces: 4R3Z-1125-BA, 5U2Z-1V125-U, BRR-139, BRRF-42
Fits the following Ford Models:
- Mustang | 2005-2014 | Base, GT | 3.7L V6, 4.0L V6, 4.6L V8, 5.0L V8, 5.4L V8, 5.8L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Rotor, Rear Part Number: BT4Z-2C026-B
$34.39 MSRP: $51.50
You Save: $17.11 (34%)
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Disc - Brake; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaces: BT4Z-2C026-A, BRRF-24
Fits the following Ford Models:
- Edge | 2011-2014 | Base, Limited, Lincoln, Premium, SE, SEL, SEL Plus (Limited), Sport, ST | 3.5L V6, 3.7L V6, 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
Ford Rotor, Front Part Number: F81Z-1125-BA
$146.19 MSRP: $220.50
You Save: $74.31 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Brake Rotor
- Manufacturer Note: Rotor - "BEFORE 3/22/99"
- Position: Front
Fits the following Ford Models:
- F-250 | 1999 | Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
- F-250 Super Duty | 1999 | Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
- F-350 Super Duty | 1999 | Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
View More
View related parts
Ford Rotor, Rear Part Number: 8C2Z-2C026-C
$146.56 MSRP: $213.33
You Save: $66.77 (32%)
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Disc - Brake; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaced by: NC2Z-2C026-C
Fits the following Ford Models:
- E-150 | 2008-2014 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
- E-250 | 2008-2014 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
- E-350 Super Duty | 2008-2014 | Base, XL, XLT | 10 Cyl 6.8 L CNG, 10 Cyl 6.8 L GAS, 10 Cyl 6.8 L LPG, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG, 8 Cyl 6.0 L DIESEL
View More
View related parts
Ford Rotor, Rear Part Number: XW4Z-2C026-AA
$86.63 MSRP: $133.32
You Save: $46.69 (36%)
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Disc - Brake; Brake Rotor
- Position: Rear
Fits the following Ford Models:
- Thunderbird | 2002-2003 | Base, James Bond Edition, Neiman Marcus | 8 Cyl 3.9 L GAS
View related parts
Ford Rotor, Rear Part Number: FR3Z-2C026-C
$434.28 MSRP: $687.07
You Save: $252.79 (37%)
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Disc - Brake; Brake Rotor
- Manufacturer Note: RH/LH
- Position: Rear
Fits the following Ford Models:
- Mustang | 2015-2019 | EcoBoost, EcoBoost Premium, GT, GT 50 Years Limited Edition, GT Premium, Shelby GT350, Shelby GT350R, V6 | 4 Cyl 2.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.2 L GAS
View related parts
Ford Rotor, Front Part Number: YR3Z-1V125-B
$75.80 MSRP: $116.65
You Save: $40.85 (36%)
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaces: BRR-54, F4ZZ-1125-A, YR3Z-1V125-AA
Fits the following Ford Models:
- Mustang | 1994-2004 | Base, Cobra, GT, GT Bullitt, GTS | 3.8L V6, 3.9L V6, 4.6L V8, 5.0L V8, 5.4L V8, 5.8L V8, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Rotor, Rear Part Number: YL2Z-2V026-BB
$75.80 MSRP: $116.65
You Save: $40.85 (36%)
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Rear; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaces: F5TZ-2C026-A, BRR-59, BRRF-32, YL2Z-1V125-BA
Fits the following Ford Models:
- Explorer | 1995-2001 | Eddie Bauer, Expedition, Limited, Postal, Sport, XL, XL Fleet, XLS, XLT | 4.0L V6, 5.0L V8, 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
- Explorer Sport | 2001-2002 | Base | 4.0L V6, 6 Cyl 4.0 L GAS
View related parts
Ford Rotor, Front Part Number: YF1Z-1V125-F
$75.80 MSRP: $116.65
You Save: $40.85 (36%)
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaced by: YF1Z-1V125-G
Fits the following Ford Models:
- Taurus | 2001-2007, 1996-1999 | LX, SE, SE Comfort, SEL, SES, SHO | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
Ford Rotor, Front Part Number: 5U2Z-1V125-E
$75.80 MSRP: $116.65
You Save: $40.85 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Brake Rotor
- Position: Front
- Replaces: 3F2Z-1125-AA, 6F2Z-1125-A, BRRF-180, BRR-133, 5U2Z-1V125-C
Fits the following Ford Models:
- Freestar | 2004-2007 | Base, Limited, Mercury Convenience, Mercury Luxury, Mercury Premier, S, SE, SEL, SES | 3.9L V6, 4.2L V6, 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
Ford Rotor, Rear Part Number: 4U2Z-2V026-FB
$75.80 MSRP: $116.65
You Save: $40.85 (36%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Rear; Disc Brake Rotor; Brake Rotor
- Manufacturer Note: Retail
- Position: Rear
- Replaced by: 4U2Z-1V125-Q
Fits the following Ford Models:
- F-150 | 2004-2014 | FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, SVT Raptor, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L FLEX, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L GAS
- F-150 Heritage | 2004 | SVT Lightning, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford Rotor, Front Part Number: 7S6Z-1125-B
$81.21 MSRP: $124.98
You Save: $43.77 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaces: 3S4Z-1125-AA, YS4Z-1125-BA, YS4Z-1125-DB
Fits the following Ford Models:
- Focus | 2000-2004 | LX, S, SE, SE Wagon, SEL, Series 25, SES, Sony Limited Edition, ST, SVT, SVT 3 Door, SVT 5 Door, ZTS, ZTW, ZX3, ZX4, ZX5, ZXW | 2.0L L4, 2.3L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Rotor, Rear Part Number: CV6Z-2C026-C
$86.63 MSRP: $133.32
You Save: $46.69 (36%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Disc - Brake; Disc Brake Rotor; Brake Rotor
- Manufacturer Note: RH/LH
- Position: Rear
- Replaces: BRRF-98, CV6Z-2C026-B
Fits the following Ford Models:
- C-Max | 2013-2018 | Energi SE, Energi SEL, Energi Titanium, Hybrid SE, Hybrid SEL, Hybrid Titanium, Premium, SE, SEL, Titamium, Titanium Econetic | 2.0L L4, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- Escape | 2013-2016 | S, SE, SEL, Titanium | 1.6L L4, 2.0L L4, 2.5L L4, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Rotor Part Number: AV6Z-2C026-A
$86.63 MSRP: $133.32
You Save: $46.69 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor; Brake Rotor
Fits the following Ford Models:
- Transit Connect | 2014-2018 | Titanium, XL, XLT | 4 Cyl 1.6 L GAS, 4 Cyl 2.5 L CNG, 4 Cyl 2.5 L GAS, 4 Cyl 2.5 L LPG
View related parts
Ford Rotor, Rear Part Number: AL5Z-2C026-B
$86.63 MSRP: $133.32
You Save: $46.69 (36%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Brake Rotor
- Position: Rear
- Replaced by: AL5Z-2C026-C
Fits the following Ford Models:
- Ranger | 2010-2011 | Sport, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Rotor, Rear Part Number: 9E5Z-2C026-B
$86.63 MSRP: $133.32
You Save: $46.69 (36%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Disc - Brake; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaces: 9E5Z-2C026-A
Fits the following Ford Models:
- Fusion | 2006-2012 | Base, High Version - Car, Hybrid, Low Version - Car, Mid Version - Car, S, SE, SEL, Sport | 2.3L L4, 2.5L L4, 3.0L V6, 3.5L V6, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Rotor, Front Part Number: AY1Z-1125-A
$87.52 MSRP: $138.00
You Save: $50.48 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Front; Disc - Brake; Disc Brake Rotor; Brake Rotor
- Position: Front
Fits the following Ford Models:
- Fiesta | 2014-2019 | S, SE, ST, ST Line, Titanium | 3 Cyl 1.0 L GAS, 4 Cyl 1.6 L GAS

| Page 1 of 14 |Next >

1-20 of 273 Results

Ford Brake Rotor

If you own Ford and want to keep it in top shape, choosing OEM Brake Rotor is a smart move. They are precisely engineered and follow strict factory standards. They are made in advanced facilities that use cutting edge technology. Each part goes through thorough testing to confirm strength and safety, so you can trust it. FordPartsDeal.com gives you genuine Ford Brake Rotor at some of the affordable online prices without cutting quality. Every OEM Ford part includes the manufacturer's warranty, easy returns, and super-fast delivery. So why wait? Shop now and get your vehicle back to peak condition.

Ford Brake Rotor cuts deep and gets cold quick, converting pedal pressure to sure stops. Ford was born as a result of a factory rollout in 1903 and rose to the top swiftly with the introduction of the moving assembly line and the reduction of build times. That has been EcoBoost obsession that delivers spirited torque consuming less fuel. Drivers do not take their hands off the wheel since voice commands by Ford SYNC can play music or directions without much ado. Another role guardian is brought on board when Ford Co-Pilot360 intercesses with lane nudges and immediate automatic braking. Even the all-electric Ford Lightning demonstrates the badge is capable of pulling, roaring and leaving zero tailpipe emissions behind. Tech remains applicable to ensure that every trip is easier, cleaner and safer to all that pick the keys. The disc brake system has a disc inside the wheel, called Brake Rotor which rotates with the wheel. When the pedal is stepped on, hydraulic pressure clamps the pads to its iron face converting its motion to heat, which is carried away by molded ribs and holes drilled in it. Brake Rotor does not glaze easily as compared to drums, therefore, the stops remain repeatable on steep grades or on rush-hour crawls. Due to the rotor thickness, drivers observe scoring, warping or runout during the time the Brake Rotor is outside the safety zone. Simply replace a worn out Brake Rotor and the caliper, pad and the ABS sensor will continue to perform their duties without incident.

Ford Brake Rotor Parts and Q&A

Rotor, Front
3L5Z-1125-AB
Q: How to remove and install Brake Rotor on 2000-2011 Ford Ranger?
A:
To access front and rear disc brake assemblies, remove the wheel lug nuts, then raise then support the car on jackstands and subsequently remove the wheel. Further on, to release the Rotor for access lift off the brake caliper without disconnecting the brake hose and secure this part provising the hose in loop wire, do not twist this hose. Looking the Rotor surface for score marks and damage; minor grooves are normally present but deep score marks that are in excess of 0.015 inch will require Rotor removal and refinishing by an automotive machine shop. Check the top and bottom of the Rotor and if pulsating occur during this braking assume Rotor runout. For runout control, on a Rotor, fix a dial indicator about half an inch of from the outer edge and rotate it, the zero pistol should not exceed the allowable limit of runout; if it does, refinish the Rotor. If can want a smooth flat Rotor to avoid brake pedal pulsations then it is recommended to resurface brake rotor and if not then de-glaze the surfaces by rubbing with emery cloth or sandpaper in circular or swirling fashion. Make sure that the Rotor has not been machined below the minimum refinish thickness that is embossed on the inside of the Rotor and is measured with a micrometer at three or four positions one half inch from the edge. If it is tight to remove the Rotor from the hub then place a wooden block on the rotor and give light blow through the hammer so that the Rotor become free from the stickiness. For installation the steps are to reverse the removal process and fix the caliper, followed by the wheel with the nuts tightened. Bring the vehicle down to the ground then apply handbrakes, further tighten the lugs nuts to the required torque then pedal the brake several time so that the brake pads make contact with the Rotor. Bleeding is only needed if the brake hose was disconnected from the caliper; to make sure the brakes are working properly before returning to normal use.