My Garage
Cart
Make sure this part fits

Ford 3C3Z-6C315-AA
Crankshaft Position Sensor

2003-2010 Ford 3C3Z6C315AA

Customer Questions & Expert Answers (8)
Ford 3C3Z-6C315-AA Crankshaft Position Sensor
Ford 3C3Z-6C315-AA Crankshaft Position Sensor
  • Part Description
    Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
  • Base No.
    6C315
  • Manufacturer
    Ford
Make sure this part fits
$53.04 MSRP: $87.27
You Save: $34.23 (40%)
Ships in 1 Business Day
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.6C315
    Manufacturer Part Number3C3Z-6C315-AA
    Part DescriptionSensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
    Other NamesSensor - Crankshaft Position - Cps
    Item Dimensions6.2 x 4.1 x 4.2 inches
    Item Weight0.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKU3C3Z-6C315-AA
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2010 Ford E-350 Super DutyBase, Chateau, XL, XLT8 Cyl 6.0 L DIESEL
    2003-2005 Ford ExcursionEddie Bauer, Limited, XLS, XLT8 Cyl 6.0 L DIESEL
    2003-2010 Ford F-250 Super DutyCabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT8 Cyl 6.0 L DIESEL, 8 Cyl 6.4 L DIESEL
    2003-2010 Ford F-350 Super DutyCabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT8 Cyl 6.0 L DIESEL, 8 Cyl 6.4 L DIESEL
  • Customer Questions & Expert Answers

    Q:
    Will this 3C3Z-6C315-AA work in my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 3C3Z-6C315-AA fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to Service the Crankshaft Position Sensor on Ford F-250 Super Duty? Posted by Customer
    A:
    The crankshaft position sensor service commences with placing the vehicle in NEUTRAL position while on a hoist. First disconnect the accessory drive belt after which you need to remove three bolts securing the A/C compressor before setting it aside. The service of the CKP sensor starts by removing both its electrical connector and the holding bolt which secures it. Tighten the new sensor to 10 Nm (89 lb-in) using the correct torque values and apply clean engine oil for lubricating the O-ring seal before installation. Reinstall the A/C compressor after securing its bolts to 25 Nm (18 lb-ft) torque and move forward with the reverse order of removal.
    Posted by FordPartsDeal Specialist
    Q:
    What needs to be done before accessing the CKP sensor for the 2005 Ford Excursion? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Crankshaft Position Sensor
    Q:
    What should be done after disconnecting the battery ground cable for the 2003 Ford Excursion? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Crankshaft Position Sensor
    Q:
    How should the CKP sensor be installed for the 2004 Ford F-350 Super Duty? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Crankshaft Position Sensor
    Q:
    What should be done after disconnecting the CKP sensor electrical connector for the 2007 Ford F-350 Super Duty? Posted by Customer
    A:
    Remove the bolt securing the CKP sensor and discard the O-ring seal.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Crankshaft Position Sensor
    Q:
    What is the final step after removing the CKP sensor for the 2008 Ford F-250 Super Duty? Posted by Customer
    A:
    Reverse the removal procedure for reinstallation, ensuring a new O-ring seal is used.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Crankshaft Position Sensor
    Q:
    How should the new O-ring seal be prepared before installation for the 2006 Ford F-250 Super Duty? Posted by Customer
    A:
    Lubricate the new O-ring seal with clean engine oil.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Crankshaft Position Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford 3C3Z-6C315-AA, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # 3C3Z-6C315-AA Crankshaft Position Sensor. It is sometimes referred to as Ford Crankshaft Position Sensor. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford 3C3Z6C315AA Crankshaft Position Sensor. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery