Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Sensor - Crankshaft Position - Cps
Replaces: 3M6Z-6C315-AA
Fits the following Ford Models:
Escape | 2005-2019 | Hybrid, Limited, Limited Hybrid, S, SE, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS
Fusion | 2006-2020 | Hybrid, Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
Transit Connect | 2014-2022 | Titanium, XL, XLT | 4 Cyl 2.5 L CNG, 4 Cyl 2.5 L GAS, 4 Cyl 2.5 L LPG
Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
Replaces: FT4Z-6C315-A, DY-1288
Fits the following Ford Models:
Bronco | 2021-2023 | Badlands, Base, Big Bend, Black Diamond, First Edition, Heritage Limited Edition, Outer Banks, Raptor, Wildtrak | 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
Edge | 2015-2024 | Sport, ST | 6 Cyl 2.7 L GAS
Explorer | 2020-2023 | King Ranch, Platinum, ST | 6 Cyl 3.0 L GAS
F-150 | 2015-2023 | Lariat, XL, XLT | 6 Cyl 2.7 L GAS
Fusion | 2017-2020 | Platinum, S, SE, SEL, Sport, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
Police Interceptor Utility | 2020-2023 | Base | 6 Cyl 3.0 L GAS
Q: How to service the Crankshaft Position Sensor on Ford Mustang?
A: To service the Crankshaft Position Sensor, start by disconnecting the battery ground cable. Then, detach the CKP sensor by unplugging the connector and removing the securing bolts. For installation, simply reverse the steps taken during removal.
Q: How to Properly Maintain the Crankshaft Position Sensor in a Ford Ranger?
A: The Crankshaft Position Sensor should be serviced by first removing the water pump inlet tube. Next, detach the electrical connector of CKP sensor. Then remove bolt which connects CKP sensor and the sensor. Installation: just do the reverse of the steps used when removing.