My Garage
Cart
Make sure this part fits

Ford 8C3Z-4234-B
Axle Shafts, Rear Driver Side

1999-2007 Ford 8C3Z4234B

Customer Questions & Expert Answers (10)
Ford 8C3Z-4234-B Axle Shafts, Rear Driver Side
  • Part Description
    Shaft Assembly - Rear Axle; Axle Shaft
  • Base No.
    4234
  • Position
    Rear Driver Side
  • Replaces
    F81Z-4234-CB
  • Manufacturer
    Ford
Make sure this part fits
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.4234
    Manufacturer Part Number8C3Z-4234-B
    Part DescriptionShaft Assembly - Rear Axle; Axle Shaft
    Item Dimensions40.8 x 8.7 x 8.4 inches
    Item Weight20.60 Pounds
    PositionRear Driver Side
    ConditionNew
    Fitment TypeDirect Replacement
    ReplacesF81Z-4234-CB
    ManufacturerFord
    SKU8C3Z-4234-B
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1999 Ford F-250Base, Lariat, XL, XLT8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
    1999-2006 Ford F-250 Super DutyHarley-Davidson Edition, King Ranch, Lariat, XL, XLT10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
    1999-2007 Ford F-350 Super DutyHarley-Davidson Edition, King Ranch, Lariat, XL, XLT10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
  • Customer Questions & Expert Answers

    Q:
    Will this 8C3Z-4234-B work in my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 8C3Z-4234-B fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    What should be done after removing the bolts for the 2002 Ford F-250 Super Duty? Posted by Customer
    A:
    Take out the axle shaft and inspect the O-ring seal for any cracks, nicks, or wear, replacing it if necessary.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Axle Shaft
    Q:
    What additional components may need to be disconnected if equipped for the 2004 Ford F-250 Super Duty? Posted by Customer
    A:
    Disconnect the sway bar at the sway links and the shock absorbers at the axle.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Axle Shaft
    Q:
    What else should be checked on the axle shaft for the 2007 Ford F-350 Super Duty? Posted by Customer
    A:
    Check the axle shaft for cracks around the holes or oversized holes, replacing any damaged components as needed.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the final step in the process for the 2005 Ford F-250 Super Duty? Posted by Customer
    A:
    Install the bolts and tighten them securely.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done if the O-ring is damaged for the 2000 Ford F-250 Super Duty? Posted by Customer
    A:
    Replace it if necessary.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the first step to service and repair the full floating axle of a Dana axle shaft for the 2005 Ford F-350 Super Duty? Posted by Customer
    A:
    Set the parking brake and place a drain pan under the rear hub.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the final step in securing the axle shaft for the 2006 Ford F-350 Super Duty? Posted by Customer
    A:
    Install the axle shaft bolts and tighten them to a torque specification of 109 Nm (80 ft. lbs.).
    Posted by FordPartsDeal Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done after placing the drain pan for the 2006 Ford F-250 Super Duty? Posted by Customer
    A:
    Remove the axle shaft bolts and then take out the axle shaft.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done before installing the new axle shaft for the 2004 Ford F-350 Super Duty? Posted by Customer
    A:
    Lubricate the O-ring seal with lubricant.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford 8C3Z-4234-B, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # 8C3Z-4234-B Axle Shafts, Rear Driver Side. It is sometimes referred to as Ford Axle Shaft. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford 8C3Z4234B Axle Shafts, Rear Driver Side. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery