Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Ford F2UZ-5310-A
Coil Spring, Front

1992-2007 Ford F2UZ5310A

Customer Questions & Expert Answers (10)
Ford F2UZ-5310-A Coil Spring, Front
Ford F2UZ-5310-A Coil Spring, Front
Ford F2UZ-5310-A Coil Spring, Front
Ford F2UZ-5310-A Coil Spring, Front
  • Part Description
    Spring - Front; Coil Spring, Front; Coil Springs
  • Base No.
    5310
  • Position
    Front
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • F2UZ-5310-A Coil Spring, Front is Ref No. 12 in the diagram below

    1993 Ford E-250 Econoline Coil Spring, Front Diagram for F2UZ-5310-A
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for F2UZ-5310-A

  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2007 Ford E-150Base, Chateau, XL, XLT6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
    2003-2005 Ford E-150 Club WagonChateau, XL, XLT6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
    1992-2002 Ford E-150 EconolineBase, XL6 Cyl 4.2 L GAS, 6 Cyl 4.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
    1992-2002 Ford E-150 Econoline Club WagonChateau, Custom, XL, XLT6 Cyl 4.2 L GAS, 6 Cyl 4.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
    2003-2007 Ford E-250Base6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
    1992-2002 Ford E-250 EconolineBase, XL6 Cyl 4.2 L GAS, 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
    2003-2005 Ford E-350 Club WagonChateau, XL, XLT10 Cyl 6.8 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
    1992-1998 Ford E-350 EconolineBase, XL10 Cyl 6.8 L GAS, 6 Cyl 4.9 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.5 L GAS
    1992-2002 Ford E-350 Econoline Club WagonChateau, Chateau HD, Custom, Custom HD, XL, XL HD, XLT, XLT HD10 Cyl 6.8 L GAS, 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.5 L GAS
    1999-2007 Ford E-350 Super DutyBase, Chateau, XL, XLT10 Cyl 6.8 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you verify if F2UZ-5310-A is the right one for my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number F2UZ-5310-A fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to Service and Repair Front Coil Springs on Ford E-250 Econoline? Posted by Customer
    A:
    Vehicle servicing for the front coil spring begins with elevation and support of the vehicle then completion of wheel removal. Before proceeding with front stabilizer bar removal make sure to support the axle constantly to protect the front brake hose. The disc brake caliper removal becomes necessary when additional clearance requires support through a suitable jack placed under the affected front axle part. The shock absorber disconnects from the radius arm through disassembly of the lower shock absorber nut combined with disconnected lower shock absorber end. Use a wrench to eliminate the bolt along with the upper spring retainer after which lower the supporting jack that holds the front axle to extract the front coil spring. Installation requires performing the steps of removal in the reverse order.
    Posted by FordPartsDeal Specialist
    Q:
    How to Service Coil Springs on E150-E450 on Ford E-250? Posted by Customer
    A:
    Service of the coil spring in E150-E450 models requires stabilizer bar removal at first. The procedure requires supporting the axle because it protects the front brake hose from damage. The disc brake caliper must be taken off if more clearance space becomes necessary. Start the process by attaching your chosen jack under the affected front axle until you disconnect the shock absorber by removing its nut. Second in the process users must remove both the bolt as well as the upper spring retainer. The front coil spring becomes removable once you lower the jack positioned beneath the axle. The installation of a new coil spring requires executing the opposite steps used for removal.
    Posted by FordPartsDeal Specialist
    Q:
    What should be done with the shock absorber upper nut for the 2007 Ford E-250? Posted by Customer
    A:
    Remove and discard it, and upon installation, tighten it to 40 Nm (30 ft. lbs.).
    Posted by FordPartsDeal Specialist
    See expert answers on similar Coil Springs
    Q:
    What should be done after removing the wheel and tire assembly for the 2000 Ford E-150 Econoline? Posted by Customer
    A:
    Take off the front stabilizer bar, ensuring the axle is supported to prevent strain on the front brake hose.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Coil Springs
    Q:
    Why is it important to support the axle during this procedure for the 2005 Ford E-250? Posted by Customer
    A:
    It is crucial to prevent strain on the front brake hose.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the next step after supporting the axle for the 2004 Ford E-150? Posted by Customer
    A:
    Remove the nut and disconnect the shock absorber.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the final step in installing the new spring for the 2006 Ford E-250? Posted by Customer
    A:
    Reverse the removal procedure while adhering to the specified torque values to ensure proper retention of all parts.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Coil Springs
    Q:
    Why is it important to support the axle during this procedure for the 2001 Ford E-150 Econoline? Posted by Customer
    A:
    To prevent strain on the front brake hose.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Coil Springs
    Q:
    What is the first step to service and repair the rear coil spring for the 2006 Ford E-150? Posted by Customer
    A:
    Position the vehicle in NEUTRAL on a hoist and support the rear axle with a suitable jack.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Coil Springs
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Coil Spring, Front F2UZ-5310-A Designed for Proper Fit and Performance

The Ford part F2UZ-5310-A Coil Spring, Front as a genuine Ford Coil Springs component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford F2UZ-5310-A Coil Spring, Front is used with Ford E-150 Econoline, E-150, E-150 Club Wagon models. The original Ford part will bear the manufacturer part number: F2UZ-5310-A and where it is made at Ford. It has been specifically developed to fit the Front and has the code: 5310.
This component is approximately 13.00 Pounds. The part F2UZ5310A is available in New condition while meeting the standards of the product rating. The Spring - Front; Coil Spring, Front; Coil Springs belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part F2UZ-5310-A can be known as Spring. Every vehicle demands 2 of this component. The inventory reference for this item is SKU: F2UZ-5310-A. Additional manufacturer-provided details include: Spring code A. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.