Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Ford 9C2Z-3F818-A
Position Sensor

2008-2019 Ford 9C2Z3F818A

Customer Questions & Expert Answers (3)
Ford 9C2Z-3F818-A Position Sensor
Ford 9C2Z-3F818-A Position Sensor
Ford 9C2Z-3F818-A Position Sensor
  • Part Description
    Sensor - Steering Rotation; Steering Wheel Position Sensor; Steering Wheel Speed Sensor; Steering Angle Sensor
  • Base No.
    3F818
  • Replaces
    1U5Z-3F818-AA, 4L1Z-3F818-AA, 7C2Z-3F818-A
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • 2015 Ford E-350 Super Duty Position Sensor Diagram for 9C2Z-3F818-A
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 9C2Z-3F818-A

  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2014 Ford E-150Base, XL, XLT8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
    2008-2014 Ford E-250Base8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
    2008-2019 Ford E-350 Super DutyBase, XL, XLT10 Cyl 6.8 L CNG, 10 Cyl 6.8 L GAS, 10 Cyl 6.8 L LPG, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 9C2Z-3F818-A compatible with my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 9C2Z-3F818-A fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to service and repair the steering angle sensor on Ford E-150? Posted by Customer
    A:
    The first step for service and repair of the steering angle sensor includes removing the steering column opening cover. The first step begins with removing two bolts from the data link harness retainer and then continuing with taking out the instrument panel left-hand knee bolster which requires four bolts to be removed. The installation of these bolts should reach 9 Nm (80 lb-in) torque specifications. Disconnect the electrical connector of the steering wheel rotation sensor before loosening its retaining bolts with a torque of 1 Nm (9 lb-in) and install it with the same torque setting. The removal process ends with installing the steering wheel rotation sensor using the reverse order. You must perform a calibrating process on the ABS module through scan tool protocols.
    Posted by FordPartsDeal Specialist
    Q:
    How to service and repair the steering angle sensor on Ford E-250? Posted by Customer
    A:
    The service and repair of steering angle sensors requires beginning with steering column cover removal and then continuing to detach the data link harness retainer by taking out its 2 bolts. The instrument panel LH knee bolster requires removal of its 4 retaining bolts. After replacement complete all bolt installation by tightening them to 9 Nm (80 lb-in). The electrical connector of the steering wheel rotation sensor should be detached before removing the 2 holding bolts that need to be tightened to 1 Nm (9 lb-in) torque upon sensor installation. Reinstall the steering wheel rotation sensor by following the opposite installation process from removal steps. Perform IVD Initialization sequence through the scan tool for vehicles that have Roll Stability Control (RSC(R)).
    Posted by FordPartsDeal Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Position Sensor 9C2Z-3F818-A Designed for Proper Fit and Performance

The Ford part 9C2Z-3F818-A Position Sensor as a genuine Ford Steering Angle Sensor component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford 9C2Z-3F818-A Position Sensor is used with Ford E-150, E-250, E-350 Super Duty models. The original Ford part will bear the manufacturer part number: 9C2Z-3F818-A and where it is made at Ford. It has the code: 3F818.
This component is approximately 0.30 Pounds. The part 9C2Z3F818A is available in New condition while meeting the standards of the product rating. The Sensor - Steering Rotation; Steering Wheel Position Sensor; Steering Wheel Speed Sensor; Steering Angle Sensor belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part 9C2Z-3F818-A can be known as Steering Sensor Assembly; Sensor, and it replaces 1U5Z-3F818-AA, 4L1Z-3F818-AA, 7C2Z-3F818-A. The inventory reference for this item is SKU: 9C2Z-3F818-A. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.