My Garage
Cart
Make sure this part fits

Ford 9L2Z-19867-D
A/C Hose, Front

2006-2010 Ford 9L2Z19867D

Customer Questions & Expert Answers (9)
Ford 9L2Z-19867-D A/C Hose, Front
  • Part Description
    Tube Assembly; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose
  • Base No.
    19867
  • Position
    Front
  • Replaces
    8L2Z-19867-B, 9L2Z-19867-B, 6L2Z-19867-GA
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2010 Ford ExplorerEddie Bauer, Limited, XLS, XLT6 Cyl 4.0 L GAS
    2006-2010 Mercury MountaineerBase, Convenience, Luxury, Premier6 Cyl 4.0 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 9L2Z-19867-D compatible with my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 9L2Z-19867-D fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    What should be done after disconnecting the A/C pressure transducer for the 2007 Ford Explorer? Posted by Customer
    A:
    Remove the condenser inlet fitting nut and disconnect the fitting, discarding the O-ring seal and tightening it to 8 Nm (71 lb-in) upon reinstallation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the first step to service and repair the suction accumulator to compressor line on a 4.0L SOHC for the 2009 Ford Explorer? Posted by Customer
    A:
    Position the vehicle on a hoist with it in NEUTRAL and recover the refrigerant.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done after removing the right-hand running board for the 2008 Ford Explorer? Posted by Customer
    A:
    Disconnect the front auxiliary evaporator outlet line front fitting.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done after recovering the refrigerant for the 2006 Ford Explorer? Posted by Customer
    A:
    Disconnect the front auxiliary evaporator inlet line front fitting and discard the O-ring seals.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the next step after disconnecting the rear fitting nuts for the 2007 Mercury Mountaineer? Posted by Customer
    A:
    Remove the auxiliary line bracket nut, tightening it to 6 Nm (53 lb-in) upon reinstallation, and then take off the two auxiliary line brackets.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What final steps should be taken after installation for the 2006 Mercury Mountaineer? Posted by Customer
    A:
    Evacuate, leak test, and charge the refrigerant system.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What specific action is required for those equipped with a 4.6L engine for the 2008 Mercury Mountaineer? Posted by Customer
    A:
    Remove the suction accumulator-to-compressor line bracket nut, tightening it to 7 Nm (62 lb-in) upon reinstallation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done with the front auxiliary evaporator line fitting nuts for the 2009 Mercury Mountaineer? Posted by Customer
    A:
    Take off the front auxiliary evaporator line fitting nuts and disconnect the fittings, discarding the O-ring seals.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford A/C Hose, Front 9L2Z-19867-D Designed for Proper Fit and Performance

The Ford part 9L2Z-19867-D A/C Hose, Front as a genuine Ford A/C Hose component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford 9L2Z-19867-D A/C Hose, Front is used with Ford Explorer vehicles and Mercury Mountaineer models. The original Ford part will bear the manufacturer part number: 9L2Z-19867-D and where it is made at Ford. It has been specifically developed to fit the Front and has the code: 19867.
This component has dimensions of 14.7 x 32.1 x 38.4 inches and its weight is approximately 2.20 Pounds. The part 9L2Z19867D is available in New condition while meeting the standards of the product rating. The Tube Assembly; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part 9L2Z-19867-D can be known as Suction Line, and it replaces 8L2Z-19867-B, 9L2Z-19867-B, 6L2Z-19867-GA. The inventory reference for this item is SKU: 9L2Z-19867-D. Additional manufacturer-provided details include: Accumulator to compressor. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.